All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Hector SLAM-based ARC navigator that maps with lidar/depth, saves waypoints, plans paths and autonomously navigates while avoiding obstacles.
Featured
Autonomous box-bot with continuous and HD servos, camera and ultrasonic sensor enabling roaming obstacle avoidance for beginner robotics
question
Power Io Tiny Using Digital Port
Can I apply my 7.2vdc power to the D0 port to power up my Io Tiny instead of using the power port plug? My load is 3 micro servos (using a 5vdc converter attached from the ports D1 thru D3).
8
3 k
Andy Roid |
question
Foul Play At Ez Hq?
Looking at the live cam pictures could there have been a "murder" at EZ. According to the marked outline on the floor a strange "being" indeed!
6
3 k
WarPig |
question
Shoulders Falling Off
JD EZ ROBOT After extended project over seas I have returned and dusted of JD. and am trying again to get this expensive bad purchase to function. The shoulders are still falling...
14
3 k
Dave Schulpius |
question
6V Regulator
For those building an Inmoov, here is a possible solution for the 6v to the 805BB servos. 12v/24v input 6v 20amp output https://www.amazon.com/uxcell-Converter-Regulator-Waterproof-Transformer/dp/B01CUA4LQQ/ref=sr_1_18?ie=UTF8&qid=1499433015&sr=8-18&keywords=6+volt+regulator
4
2 k
jstarne1 |
question
New To Ez-Robot
Just discovered ez-robot and ordered a developer kit. I'm discovering this just as I'm finishing my latest project. All rc driven using roboclaw motor controller and sparkfun wave. Don't...
4
3 k
Troypicou |
question
Camera Cable Connector
ezb camera cable is too short. I need a longer cable. I searched the community but didn't find a good solution. The connector is a special connector custom-made by ezb, or is there some standard connector I could find from connector makers to make an extension cable ? What kind of connector is that ?
14
4 k
Dave Schulpius |
question
New Hdd Servos
Just received my upgrade HDD servos,(super quick delivery from supplier) and they are fantastic,no buzz and no worry of burn-outs. Would recommend to all. Well done EZ-robot.
55
7 k
Nomad 6R |
question
Indoor Navigation System
Is there any updates on the Indoor Navigation System? Is the possible release still around the end of summer ?
3
3 k
DJ Sures |
release
Release 2017.07.06.00
Synthiam ARC: fixes script flow on plugin add, blocks missing ez-bits, YCbCr camera tracking with optional histogram EQ, highlights servo 0, glyph ID
4
4 k
DJ Sures |
question
Voice Synthesis
I want the really low sounding voice from the infamous(2 kids died getting highest scores)... arcade game Berzerk for my robot. I actually have all 30 words from the Mame emulator program...
13
8 k
Mickey666Maus |
question
Wifi Range Comparison V4 ,V4 New Comm And Tiny
Hey guys , I have the original V4 and IOtiny. I want to know if anyone sees longer range on any particular unit. To have a robot in the yard I would like to get the best signal. I was going to ask the question since it is raining every day this week so I can't play around with range physically. Thanks
4
3 k
jstarne1 |
blog
Can Your Robot Do &Quot;The Dab&Quot;?
Robots doing The Dab, Cognitive Vision demos, a 5-ft EZ-Robot bartender with JD serving candy, and ALTAIR EZ:1 meeting SoftBank Pepper.
0
671