All Community Content
Stay at the forefront of robot programming innovation with ARC Pro, ensuring your robot is always equipped with the latest advancements.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Publishes Kinect (Xbox 360) obstacle distance scans to ARC NMS for SLAM/Navigator, using configurable detection area to ignore irrelevant depth.
Featured
Metal robot with voice commands and automatic positioning for easy viewing and interactive demonstration
question
New Here And Am Asking Some Qu
New here and am asking some questions. My project is an independent drive via 24 volt Jazzy motors controlled with a Sabertooth 2x32. My wish is to have autonomous operation and have RC over ride. I have an operational RC and operational Arduino autonomous but have not been able to assemble both. Dimension Engineering (Sabertooth) have guided me...
5
2 k
DJ Sures |
question
So I Am About To Buy Another L
So I am about to buy another lipo battery for the EZ VB4, the one I was using for my EZ BV4 was a 7.4V, 1300mAh and I was wondering if it is safe to use a 11.1V, 1300mAh. I have read a few threads in this community but I just felt safer in asking if someone has used the 11.1V and has not had any issues burning anything.
3
2 k
Heattroks |
question
HDD Servos
Hi, I am 3d printing the STLs for the Revolution6. I have 12 HDD servos on order, due in March. In the meantime I have to hand the Developer Kit which has HD servos. These do not seem to fit the EZ...
4
2 k
itsmeintorre |
question
Hi, Pretty New To This And Sea
Hi, pretty new to this and searched but couldn't find a answer. I have about 10 servos that run on 5v and I want my ez-b v4 to run them, is the pwm from the v4 ok as long as you power from a 5v source? Thanks!
4
2 k
Almostrodney |
question
Hello Everyone,We Have 4 EZ-
Hello everyone, We have 4 EZ-Robot Humanoid JD. The 4 ez-robots are 2 years old. We tried connecting via phone and it worked but the capabilities of the phone software was limited. the PCs we used and had the software recently downloaded wouldn't recognize the robot at all. But one of the teammates who had the software downloaded from the first of...
3
961
DJ Sures |
robot
Jstarne1's Ryobi 40V Robot Mower With 40V Trimmer Whiskers By Jstarne1/ Starnes
Back to building robots after moving to Chattanooga and...
167
30 k
Nomad 6R |
question
Hello Community,I Would Li
Hello Community, I would like to deploy something similar to this project NeoPixel Ring with Arduino as control board but I need to use LED strips. 60 LED qty. Will this work for LED strips? Or is there a simpler way to control many LEDs with the EX-B Help is greatly appreciated. Thanks, Mark
1
2 k
Jeremie |
question
We've All Seen It. The Super
We've all seen it. The Super Armatron has it, the Omnibot 2000 has it, and if you take away the head of Gypsy from MST3K, it's all you have left! I am of course talking about those fun bits of rubber tubing that add a clean, industrial flourish to any robot. I'm in the process of taking an old Robie Sr. and giving it the same treatment that DJ...
2
2 k
Bobsheaux |
question
I’M Trying To Connect An Ardui
I’m trying to connect an Arduino Nano with the EZ-B v4 to offload some of the work. UART1 and UART2 work fine! Problem is with UART0 (information is send but...
34
3 k
Tonlaar |
question
Cheat Sheet Question
i dont see a wait command in the cheetscheet for the camera.i wanted for jd to wait before he sees the color red, then do the respons.
6
3 k
Nomad 6R |
live hack
Botmatrix Live Hack Session 5
Make Voltron walk with 3D-printed brackets to lower its height, add Audacity sound effects, and join interactive chat during the build.
11
3 k
Jeremie |
live hack
DJ's 4Th Hack Event (Arduino, Bioloid, Lewansoul, And More)
Use LewanSoul serial servos and EZ-Builder to program Robotis Bioloid, add a camera, connect Arduino,...
37
7 k
fxrtst |