cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Bumsteadsean's Sentrybot
Prototype Sentrybot assembled with Arduino Mega and Mini-ITX, stereo CCD cameras, digital rangefinder, GPS, wired...
Jstarne1's Diy Pc Battery Backup Power Source And 12 Battery...
Build a portable APC battery backup with parallel batteries and 12V charger to power laptops all day using repurposed PC...
DJ's Cyborg Snowman
Animate a snowman with ARC and an EZ-B controller using webcam motion tracking, servos and voice recognition for...
you said a few comments before it was raised 12 inches,so where is the other 5 inches
never mind i see on the bottom half,and why do you need so much more height like on my omnibot when ask me why i wanted to add only a total of 3 inches to mine
It's 4 inches In lower base and it will be 7 in the upper torso , I'm expecting maybe a inch more height due to the new neck mechanism.
The 4 inch riser on the bottom fixed some space issues. First the video card is very tall and I needed room for that guy. Also I needed more room for a board to power the computer because nothing premade I could buy is reliable enough to handle the power requirements. The base being raised solved those constraints.
The upper torso has to be raised because of the vacuum being taller than the torso. So it must be raised. I'm supper happy though! Most awesome omnibot 2000 ever!
My other small omnibot is being made into a vacuum as well. He will be basic in comparison to Jarvis.
looks good so far ,mine going for the 6 millon dollar omnibot ,because of the strength and cost like it said in the movie,can rebuild him ,faster and stronger then any man plus the cost will be very very high,may 6 millon dollars lol
Well I will get Jarvis tomorrow. Then will do this weekend. I'll ship him back out Monday I'm hoping.
No rush Sam , your awesome!
Ok so I cut up the harbor freight flashlights I got for free which are being molded into the front torso.@troy /glickclick I think o descided to steal your elbow idea , having a servo in there makes it easy to attach and added strength. I don't have bretts hose yet but when I do I want to make sure I can center up the bracket on the shoulder. Also the idea of a counter weight to balance the arm is a awesome idea!
are they better and have more light light then the others you was going to use looking to add light to mine design too