cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Steve's Navigation Test Robot With Intel Realsense T265
My Navigation test robot with Intel RealSense T265 on a first Gen IRobot Create using an EZB, and my wife's...
Goldenbot's Stickman JD Robot V1.1
Say hi to Stickman JD (In version 1.1 I added an x,y,z axis and a floor grid so you can view the Stickman from...
Rz90208's First Look At Fud2
Finally got around to taking a picture of my current Bot FUD2.
HAIR dryer will work on high heat if looking to bend solid clear acrylic use very hot water,high heat will damage the surface
I have used the heat gun several times now and it works just fine. You can't hold it straight on it you have to wave it like a hair dryer but it works just fine and fast. I used a salon grade dryer and it didn't work.
i use heat guns too the heat is very good, what good about a heat gun a good one has attachments for it,thats why i loook for the best one it cost more,but last longer and a better value ones you get from big lots are junk,but still do the job
I got mine from Home Depot, spent about $30 and have had it for about 5 years. I use it when I sculpt my dolls.
I think if Josh wants to do it himself he could get a cheap one.
Actually you did a phenominal job on the first one I messed this one up lol.
You're sweet. Thank you.
If you want to send me the other part you can. If you want me to pick up the stuff and send to you then I can do that too. If you want me to send you the stuff then today would be a good day to let me know.
leaving friday night to ohio,cleveland area,be gone all week till next sunday.need to repair some in-house testers for work was hopping to get photos up of my frame stress stress stress but will have free internet at the hotel
josh you raising or lowering your omnibot
Jarvis is taking his second trip to see SAM
with him I sent Sam goodies , 10 IR led illuminators , micro servo , 2 voltage regulators with the digital readout like I sent Brett , a motion detector and some other goodies. Sam did so well making the first set of skins all I had to do was fiberglass the.insides which was cake! I made a attempt and messed up so she's doing the upper torso riser as well.
@robotmaker the bot is being raised to a similar height in the picture , 7 inches
@sam if you ever need something fiberglassed for more strength but minimal weight let me know! Thankyou Sam your awesome!