Robot Building Questions

My Robot Is Too Loud.

Hey! I was testing my speech recognition and my robot won't respond to 'robot stop'. I know there's nothing wrong with the command because it recognized my speech when it was stationary but when it's rolling it seems to not pick up my voice over it's own motors. So how do I make them more quiet? Edit: I forgot to mention that I'm using a head set...

How Can You Fix The Camera Quality On Raspberry Pi 3B

How can you fix the camera Performance  on raspberry pi 3B. I’m making a robot that tracks a red ball but because of the raspberry pi 3B’s GPU lagging it can’t process the ball. I did check the raspberry pi windows performance tips but with no changes in camera performance?

Iternet Connection

I have 2 JD Humanoids, both connect to the internet and initialise then go dead, still connected, blue light constant, but with no functions, The camera says its ready but when switched on immediately stops. If I disconnect and turn the robot off the site stay available and stops normal connections to the internet, I have to reboot the PC to get...

The Program Shuts Down When I Move The Simulator Pictures?

Why does the program shut down when I release the mouse button after moving one of JD's parts (servo)?

Problem Controlling Servos While On A Iphone Hotspot

Hello, I have a Darwin Mini that I hacked to also carry a Raspberry Pi Zero. The OpenCM connects to the Pi via Micro USB and I run ARC on my Windows laptop to connect to the Pi. I installed the OpenCM USB port settings on the Pi and so far I can successfully control the servos that are connected to OpenCM from ARC. When I run ls /dev/ttyA* on the...

ESP32 And A PCA9685 To Control 16 Servomotors With ARC

Good day, my problem is this: I want to build a robot myself. I already have the following servo control components: ESP32 and a PCA9685 to control 16 servomotors. I have already installed the ESP32 DOIT Dev Kit v1 EZ-B and the firmware for Synthiam and a control with 1 servo via WIFI works. how can I connect the PCA9685 to the ESP32 so that I can...

Using Seeed Studio Respeaker 2 Mics Pi Hat On A Raspberry Pi Zero

Hello, I'm wondering if I could use the microphone on the Respeaker 2 mics pi hat (https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT_Raspberry/) on a Raspbery Pi Zero. So far I can only find information on using microphones on the platform running ARC. If there are ways - how do I pass the recorded audio file through speech recognition? Thanks.