Anything that's unjustified I'll gladly take back however you may notice all of my comments have been justified, in many cases I have gone the extra mile to provide proof of their justification.

Whenever any criticism is posted you will notice it is constructive and I will not only criticise but offer solutions and/or other ways of doing things. For no other reason than to help others, make their EZ-Robot experience better and easier.

Not once have I ever made any unjustified negative comments to any one of your posts.

If you have a problem with any of my posts and believe I have broken any of the site rules bring it up with EZ-Robots. I'm done with you and have already told you that I'll not be offering any help, advise or insight to you on your projects however I will always offer help to others and correct anyone when they are wrong.

Yes, I have corrected you a number of times but only when you are wrong or have advised bad practices or unnecessary methods. If you don't want me to correct you or point out faults, errors etc. then stop being wrong. It's nothing personal and it's not just you I correct or advise on doing things another way.

I'm having nothing more to do with this argument now, I would suggest you leave it as it is but there's no point as I know you will make some kind of comment about me again - oh well.

Apologies to the original poster but I'm sure you didn't want hopes falsely lifted by incorrect information.

gentleman ... please dont fight i dont know if they were ever sold in belgium i have checked several sites such as e bay end local sites the ones that i find are most of the time the omnibot and NOT the omnibot 2000

if i do find an omnibot 2000 in good or working condition than the prices sometimes go up to 1500 dollars or more

i know its a cool robot that costed original around 600 dollars but in the end .. its still an old toy that can break easy also, i can imagine that its alsmost impossible to find parst

so i dont want to pay more than 5 - 600 dollars for a good working one i am handy with tools and a lot of other things but i am not an electro wonder so finding one that needs a lot of work is not an option so buying 2 or 3 robots in the hope to have in the end 1 that works is also an expensive deal and to be honnest ... i dont see how i can manage that because also the damaged ones cost around 2 - 300 dollars

original or slightly modified .... if someone has one to sell, or know of someone, or some place where i can find one .... i would be verry thankfull

if you find one that you can repair and it stays under 600 dollars.... and you want to sell it .... contact me

kind regards in advance and for the help so far

it's a waiting game I'm afraid. Just set up the searches on ebay, set the email reminders and smartphone notifications and just wait and hope for the best (and try to beat auction snipers which can be difficult).

thats the way RICH is,on all my my theads and post ,everyone ,not one am i right on anything and second he doesnt know me at all

One bad ITEM on this post he says i am wrong about the prices ,when i now how much i paid for them JOSH sold me one on ebay very cheap clean and in good condition At $100 and bought other little higher and lower.

omnibot 2000 complete with remote

2 days left at $202 may be the seller can ship to you will be may be much less then $400 with shipping and custom fee's,and if you ask the buyer to ship as a gift and give a lower amount the custom fee,s would be much less ,and have him remove the battery for lower shipping cost ,since most likely its bad over all thses years

also belgium is nice place place ,i was there a little while ago i had 2 1/2 months there and in london and most of england and france

yep auction snipers, i am most likely one i buy alot and alot of robots and bid at them at the last minute to get the lowest price

This is the last one I got back in August. It didnt work but that was ok. It is rare to find near this price in my experience. My Omni2000

I bought the upper half , from the waist up and spent 100 dollars a month ago. I watch omnibots and the 2000 models all the time. A year ago you could find them for a150-200 and I purchased two back then. Since the projects and popularity of ezb has caught on the omnibot and walle have really gone up in price. Perhaps you can get a regular omnibot for the price you are looking for

that kinda seems tr ue,just need to play the waiting game zand keep watching you might get lucky i boght one cheap it was all apart and every piece was there and in good shape

I could easy put it back together and made a working omnibot,but instead i will clean it and get it ready for another EZB robot project