If this could help?

https://synthiam.com/Community/Questions/6820&page=1

I'm aware of the size listed on the product page. I'm also aware of that thread. Neither are very helpful.

you can talk to james ,he can look it up for you.

It may be worth going to a hobby shop and matching it up. The spline is the key. You would need to buy a higher priced one once. The cost of shipping from EZ robots for 1 servo is high, so it may be worth getting it locally. You would then know the info on the spline for the future.

Yup, that's not a bad idea. Good hobby shops that are local are getting harder and harder to find.

I was rather hoping someone from EZ-Robot would say, "oh you can get X servo and stick in there."

But having looked around, the price on EZ-Robot servo is very good. It's just time to get one and additional shipping that is the bummer. Which is why I'd still like another source for them.

Justin, How many do you need? I have a couple of spare EZ-B Claws which use the micro servo.

You can buy me a $45 EZ-B gift card which will allow me to replace them ($19ea) and cover the US shipping of me sending them to you. I plan on making an EZ-B order when the V4 x/2 conversion and USB adapter are released, and I won't need the claws before then.

Alan

Ezrobot will not be providing you with information to purchase third party replacement parts. The free forum, bandwidth, app storage, software, mobile app, etc that's free for you to use is paid for by ez-robot product sales. If you wish to find replacements elsewhere, ezrobot will not be able to assist you with that due to conflict of interest. This thread will most likely be deleted.

DJ, I get that. Feel free to delete as you see fit, it won't hurt my feelings. I'm not looking to pull sales away. Having searched and searched for the right servo, the price of the EZ-Robot servo is a good value, it really is. Length of time to get one and shipping costs for one or two servos is the detractor for me personally at this time.