Robot Building Questions

Ez B & Xbee Connection Question

Hi, my name is Eric I am having trouble getting ARC connected to the ez board. I am using 2 xbee instead of Bluetooth. I can get the xbee to communicate with each other using DIGI software but not to ezrobot. Baud rate for the xbee is 9600, I am not sure what it is for ez robot? The com 3 port shows in ARC but the pop-up saying there is no...

Magnetic Rotary Encoder

Found this. It may be of interest to some. Thought I would post it. May can use it with the EZ-B. Quote from web site: "It uses an AS5040 magnetic rotary encoder to measure the absolute position of the rotor of whatever motor you're using. This is actually pretty exciting. Powerful servo motors are expensive, but with one of these, you can use...

300 Amp Controller Question

Hi my name is Eric I appreciate the help I have received getting my ez-b up and going. I purchase 2 of the recommended 300 amp motor controllers from ebay and am having problem getting them to work. I configured them to a modified servo and have hooked the t terminal to a 12v large batter and the other 2 white and black wires to a 12v cordless...

Help With Ez-Sdk!

Hello friends I want to know how can I use the EZ_SDK in Free Software (Linux), I have a project and I want to migrate to Linux, I hope your help!

Sdk Vs Ez-Script Updates

This question is more aimed at DJ, but I would just like to know if the SDK will be kept updated or if the basic trend seems to be to stick with using EZ-Script and ARC at the moment...? The last update version for EZ-SDK is 2013.01.29.00 vs ARC which is 2014.01.15.00. Hopefully at the time of receiving the EZ-B v4 I take it the EZ-SDK will be...

Revolution Roli

confused I want to test drive this before I buy with ARC . I see a list of parts How do I get them in to my library in the cloud to work with? I have looked at the examples and want to try a design on my own with what comes with Roli. Want to add the arms and tail for one. Also the cup holder but I cannot find it to buy. As you can see I need lots...

Something Broke.

Hey team... FYI - The download link not working... @ Tameion

Exiting A Classic Control Loop In A Script Via Voice Command?

Below is a simple code I hacked up to use with the voice recognition control... It works as expected... I am controlling the robot via voice mostly, but sometimes i want it to roam autonomously (as per my simple code below). However, problem is I can't figure out how to exit the script at will... Once this script starts it only stops when the ping...

Adding D Or V Entries Into Port Summary Control

Greetings DJ, this bug is very very minor. Adding a D10 or V10, the entry is placed in the Port summary list after D1 or V1 as in D0 D1 D10 D11 D2 .....etc same for V entries These entries should/could be listed in order ie D10 following D9 etc I could very well live with this as I know your time is well used for "bigger issues". Perhaps...

Sdk Application

@DJ Sures OK, I am also pleasure to propose my application. I am doing a research about the teleoperation of robot for my doctoral degree. The multi-modal human-computer interfaces, which are eye gaze tracking, EEG, and joystick, respectively, are used to teleoperate the robot movement. In order to reduce my research cost and time, I choose the...

ARC On Windows Rt

Will the current version of ARC run on Windows RT devices such as a Surface? thanks