Robot Building Questions
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Robot Sticker
Feetech Serial Bus S…
Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports,...
Feetech RS485 Servo
Control Feetech serial bus smart servos via EZB UART or PC COM port in ARC using virtual ports...
Total Speech Recogni…
Offline Windows speech recognition with open dictionary, confidence filtering, and scriptable phrase...
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion and reporting end-effector location.
SUKI 6-DOF biped uses inverse kinematics, IMU for future balance, blob-based ball tracking, gait sequences with dampers to mitigate actuator...
Nixie Tubes -Simulated?
Anyone familiar with Nixie tubes? Looking to simulate if possible. I found some actual tubes but not sure about all the high voltage drivers ect. Looking to integrate into...
7
3 k
Mp3 Trigger & Variables / Sequencing
Hello All, Just working on some setup for big R2's audio setup. I'm using the Sparkfun MP3 Trigger. I'm trying to use $variables in command strings and it's not working. Is ARC capable of this for the Mp3Trigger command strings? Here is a normal command line: MP3TriggerVolume(D7, 38400, 30) I want to do something like this: $Mp3Volume=30...
3
3 k
Omnibot Mk Ii
Rare (at least over here) MKII Omnibot up for grabs on ebay Omnibot MKII Not one to take apart really as I'm sure it's probably quite valuable but since I shouldn't really buy it (need money for something else) I thought I'd share it.
3
3 k
Dac Audio To Lm386
is is possible to have a custom module that ouputs an mp3 as pcm out a digital port. I ask because I am running it to a lm386 amp and speaker. a trick i use with arduinos for basic...
6
2 k
Kirobo
Kirobo interesting concept turn into rality
3
3 k
What Exactly Are The Servo Power Board For?
I see it is a place to plug servos into and then, I imagine into your EZB. But, what is the benefit? Thanks!
5
3 k
Questions For Josh, Please
hey Josh! I have written many questions unanswered by you. I guess you have been busy. I figured I would put them all in one place so it would be easier for you to find them. I have forgotten many. Here are some of them: Have you actually tried the schematic where you had two twelve volt and two six volts hooked in such a way that you could charge...
9
4 k
Why Does The Ez-B Not Show
I try connecting the EZ-B to my computer. I go to the Bluetooth window on my computer then add wireless device but it does not show the EZ-B
18
3 k
Is The Store Gone?
Hello all, I am trying to buy some EZ-B boards, but I can find the store on the EZ-robot site. Did I miss something? Is the store closed and someone else is selling then? Airwave1206 confused
10
3 k
Wifi Robot
I got an elechouse TLG10UA03 kit which I have up and working now, but can't get ARC to connect to my EZ-B board yet. I have verified that I can send and recieve characters thru the wifi TLG10UA03 link...
24
8 k
New Micro Gripper
eek Have you guys seen these: https://www.servocity.com/html/micro_gripper_kit.html A new micro gripper from Servo City for $6.99, WOW!
4
3 k
? Ezb Interface To Arduino Board
I was wondering is there any way to interface an ezb board to arduino board? j
2
3 k