Robot Building Questions

How To Use Wheel Encoder From Blockly

I have a 2 wheeled robot running the EZ-B V4.     The EZ-BV4 is driving a PWM Hbridge.  Each wheel has an encoder counting the wheel pulses using an Arduino Mega 2560.   My question is how can I command my robot to move a specified distance stop, and then turn 90 degrees and move another distance stop etc. I assume I can feed the distance into the...

Employment Opportunity Sydney Australia

We are looking to create series animatronic puppet shows and need additional assistance.  We would like to employ some one on a part-time basis.  We are located in Sydney Australia.  We have had no success trying to hire using traditional job sites.  Given we are using ARC software and EZ-ROBOT hardware we thought trying here might work.  The...

Neato Xv11 Lidar For The Ezb4

is there a version that runs through the ezb4 controller? running the lidar from the PC direct (using 3rd party controller) is fine for testing and learning but does nothing for making it mobile for a small robot.

Adding Leg Servo's

Hi there, Is it possible to add servo's to the JD robot? I ask because I am missing an up/down movement for the ankles. It will make JD taller and maybe prone to fall on its face, still I would like to try it and make its gait more realistic for starters. Maybe some of you have tried it out already and know the answers. which D--pins to use for...

Servo Replacement Gears

I have a new (older) servo, one of the original EZ-Robot S08NF STD Servo that has bad gears in it. Don't believe that these where especially made for EZ Robot, so what company/model number are they? Thanks