Robot Building Questions

I Don't Know How To Word This. But Would Like To Know If It Is Possible.

Ok, I have one ARC setup on EZB that does all of the RSS. I have a second set that does Navigation. I have a third set that is kind of like a ChatBot. When I try to operate all of these together at one time in one script, it gets so sluggish that the mouse sort of freezes while it does say a video tracking, or radar scan, etc. then it comes back....

Roomba Port Rxd Voltage Output

I am eager to connect my EZ-B to my Roomba, but don't want to risk frying the board. The EZ-B tutorial states: *Note Before Connecting To EZ-B:: Check the signal wire (white wire) with a volt meter and ensure you have zero volts from the Roomba. If you see voltage, you're connected to the wrong port. If you apply current to the the EZ-B from the...

Hexapod

Is it possible to control a hexapod using EZ-script or movement script in the ARC built for non-programmers?

Ez-Bits - Can Someone Give An Overview Please?

Hi All, I'm a newbie and I'm currently connecting all sorts of goodies to my EZ-B. I've seen various refences on the forums to EZ-bits as a future add-on mechanism for peripherals and I've also noted that apparently the PCB went to the printers a few weeks ago, but I can't find any reference to what capabilities it is expected to have, or when it...

Bluetooth Replacement Gone Wrong?

DJ, since im having issues with win8, I decided to pull out my usb to serial adapter. it does 3.3 or 5v. I tried 3.3. I attached according to how labeled on my board. Starting from pin closest to power connector it is RX,TX,GND,V+ I smelled hot resistor after a couple minutes so I unplugged everything and checked the underside of the Bluetooth...

Bug With Windows Speech Recognition Macros

Hello, I have a bug since I installed Windows Speech Recognition Macros that I had not before. When I want to use speech recognition to ARC, I get this message: " Voice recognition was not able to start. There is either no listening device or the your operating system is not supported". My other voice recognition programs work well. I use...

Ultimate Wall-E For 250.00? Whaaaaaaaaaaat!

So yeah im contantly looking for these....1200 on amazon and 750 on ebay but i googles searched it under shopping the second item 250.00 i went to the website....look sok i guess.....did some research on it, couldnt find anyting bad...they do come from china, not sure if that matters... What do you giuys think?

This Is Me, I Called Dibs....

ultimate wall -e ebay no remote...

Wireless Camera Focus Distance

For those of you using the wireless camera that came with the EZ-B kit, what's the typical focus range are you using? im guessing about 8-10 inch for color/face tracking, but anything else further gets blurry. It sure would be nice if it has auto focus.

Ps2 Cable For Roomba

I just want to double check something on the PS2 cable for Roomba connection. As I understand I need to connect to pin 3 (RXD input) and Pin 7 (ground) Your tutorials say to make sure there is no voltage or I will fry the D0 port. So here is what I don't understand: Pin 7 is supposed to be ground and when I connect the multimeter to pin 7 and pin 3...