-636459989693042832.jpg)
-636459989943960739.jpg)
-636459990485479714.jpg)
-636459980560649389.jpg)
-636459975718038038.jpg)
-636459969210457653.jpg)
-636459967995726605.jpg)
-636459970865108143.jpg)
-636465120384538626.jpg)
-636465113490053830.jpg)
-636475595612490698.jpg)
Here is the current look of this project, Super cool update, magpi magazine wants to feature this build with steps how it was done , !
By jstarne1
— Last update
Discover more robots
Joseph4760's Say Hello To Little Frankie
Little Frankie robot downsized to 1ft, built from mixed parts, driven by 12V motors and 11.1V LiPo, running EZ-B V3 and...
Mereyes's Mereyes WALL-E
WallE replica using EZB v3 controller: wheel/arm/head servos, BlinkM eye, 2.4GHz camera, SparkFun MP3 trigger, 6V...
Randez's Randez's Omnibot2000 Thread...
Refurbishing a 25-26" tall build with greasy elbow leak and melting 3" wheels; planning urethane tire molds or...
Kinda excited , I am suppose to get the big order I put in tomorrow ! Woop Woop !
I still need to find a way to weather proof the motors , wiring and electronics.
How about stuffing it in a Hefty Bag? LOL
It won't help with the motors, but you could pot the electronics in non-conductive silcone. Pretty permanent solution, so be sure of your design before you do it.
https://en.wikipedia.org/wiki/Potting_(electronics)
Alan
Hey thanks for the idea. I have been watching youtube for ideas and I found that Plastidip can be sprayed onto electronics for waterproofing , but if you even need to get it off the board, it is possible to pull it off. ( usually not in one piece but its possible)
https://www.youtube.com/watch?v=dIOU7iwLWrE
Spray Dip a motherboard in white ! I might actually do that since I love white so much.
Your GPS tracker maybe a challenge in future as a lot of the GSM networks that provide this service are shutting down. If you have an old android phone laying around maybe you can stick in a twillio sim and track that.
Yes a android phone hidden inside is certainly an option if this does not work out. I know att and Tmobile as well as straight y’all still support 4 channels of gsm but they no longer support EDGE internet speeds which utilized those frequencies all at once to make a 128 kB data connection.
I started to disassemble the chassis , I can see there are certainly differences from the other one and I think I may swap the front end so I can easily find a place for headlights. The screws on the fender are badly rusted and I put some for in the hole to break it up.