Discover more robots
Ezang's Mr. Metal Again 2021 - Made From Servo City Parts -...
Greeting from Mr. Metal wishing everyone well and announcing a body move soon - signed EzAng
DJ's Robot Head
Develop a humanoid head with Synthiam ARC, adding new features to support head functions for a humanoid-type platform.
Redzone's Gideon Inmoov
Redesigning Gideon's lower body using four EZ-B v4 controllers to separate body parts, relearning commands and crediting...
Thank you @Holy That gives me a really good guide (especially because I am in Canada :-) Your build is very clean so appreciate you giving me the break down. Looks like labour is your biggest expense and your attention to detail shows. Thanks for sharing.
@Nink, Sure no problem. Let me know if you need anything else. I'm here!
@holy1, I see you’ve add something between the back pistons on the stomach. I’m wondering what you did there.
@Bob, It's a tilt re-stricter. I put it on when not using the tilt forward function so it stays in one place. I use an elastic to hold it in place.
Here is the file and stl.
The .step file won't upload.
Thanks, I’ll have a look at that. Does your stomach move quite easily or does it need a push move it? I have to give mine a good push to move it when the power is off.
No, it needs a push to move but if the arms are straight out holding something and the base servos are released it will drift forward. The tilt restrictor will prevent that but will still allow leaning backward a few degrees.
T-One does Christmas Vacation rant.
Bad Robot