Discover more robots
DJ's Cookie Monster Robot
EZ-B Cookie Monster robot: auto-collision detection, timed head motion, remote-controlled arms, radar screen, DIY frame
Perry's Baby Yoda Is Too Cute
Animate a 3D-printed Thingiverse character with an Iotiny and servos for head, arms and walking, add soundboard baby...
Tfitzrandolph's Custom Robot Build Wobble Frog
Wobble Frog robot toy built with EZ-Robot IoTiny, LIPO and 270 servos, controlled via Synthiam ARC scripting to create...
Thank you @Holy That gives me a really good guide (especially because I am in Canada :-) Your build is very clean so appreciate you giving me the break down. Looks like labour is your biggest expense and your attention to detail shows. Thanks for sharing.
@Nink, Sure no problem. Let me know if you need anything else. I'm here!
@holy1, I see you’ve add something between the back pistons on the stomach. I’m wondering what you did there.
@Bob, It's a tilt re-stricter. I put it on when not using the tilt forward function so it stays in one place. I use an elastic to hold it in place.
Here is the file and stl.
The .step file won't upload.
Thanks, I’ll have a look at that. Does your stomach move quite easily or does it need a push move it? I have to give mine a good push to move it when the power is off.
No, it needs a push to move but if the arms are straight out holding something and the base servos are released it will drift forward. The tilt restrictor will prevent that but will still allow leaning backward a few degrees.
T-One does Christmas Vacation rant.
Bad Robot