Super Jader Goes Bionic

Question

super HDD bionic jader gets a new arm.

Smarty · Answer

Hey Nomad, I saw the arm on eBay and I tought its to big and no good quality but I was wrong. Very cool Mix and nice work, hehe :-) the arm comes in small pieces. is it difficult to build the arm ? How good is the quality of servos and pieces? regards Marty

Nomad 6R · Answer

hi smarty the arm is fully assembled,do need some adjustments fine tunning. arm+hand and here full robot full robot

Nomad 6R · Answer

i forgot to tell.servo's are 7.4 volt.and have two connections per servo. each side has a connection. if they are strong,i dont know that .

Toyhackrobotics · Answer

Very cool Nomad, time to extend his legs soon?

Nomad 6R · Answer

i dont think so.need to do is right arm/eyes/mouthled.

Smarty · Answer

Nomad, the arm-servos work problem-free with the ez-robot controller ? cheers

Nomad 6R · Answer

as far i can see yes they do.aldo am going to by the full robot. the arm is heavy for jd.

Nomad 6R · Answer

also availeble is the 5 dof hand.very usefull for excample the mecanoid robot.

Toyhackrobotics · Answer

Cool robot hand Nomad

Nomad 6R · Answer

hi tomy i think usefull for mecanoid robot.i have now set up robi eyes.later video. now i test the mouth led.

Toyhackrobotics · Answer

Ah awesome looking forward to that. Would like your help with not only the rgb eyes for my GF's Robi, but the mouth led also.

Nomad 6R · Answer

tomy the rgb dont work on robi cause he dont have a rgb connector like the ezbv4. i just notest i dont have the wire for the mouth led.just ordered one. i use same colors as ptp explaned few weeks ago.also the angle robi head, is diff then the jd head is flat.

Toyhackrobotics · Answer

@Nomad, thank you for the video. Hmm Robi is going to be a challenge with programming thats for sure...getting rgb's to sync is a nightmare for me.

Nomad 6R · Answer

tomy am using original eye boards from robi. the rgb from ez is much easier to use.but you have to have diff eye glass, and 3d print part to get all the light inside eye case.

Toyhackrobotics · Answer

Ah wow ok, so does anyone print those parts? Just remembered Smarty's robot, the one with the Robi head, i wonder how he managed to sync those rgb's?

Nomad 6R · Answer

yes me too.maybe he can chim in,smarty we need you,please. robi's eyes are not rgb,they are tri color leds.

Toyhackrobotics · Answer

Oh Tri-color, yes i think they have 4-5 colors all up, not exactly sure. @Smarty, could you please tell us how to make Robi's eyes work?

Nomad 6R · Answer

i dont think smarty robot has original robi eyes.

Toyhackrobotics · Answer

I think that one has upgraded eyes, but if you watch his first video he has the eyes and mouth in sync perfectly.

Nomad 6R · Answer

tomy yourre correct ,amazing video.

Toyhackrobotics · Answer

Yes, even the mouth led is in perfect sync with the voice. Great video ive watched it many times even though i can't understand German.

Nomad 6R · Answer

i hope smarty join us and teach how to do it.

Toyhackrobotics · Answer

That would be great.

I noticed there is only a 4hr time difference between Belgium and Australia, so we should skype sometime soon?

Im just waiting on servo extension cables and then im going to power up my humanoid for the first time, we should get our robots to have a Skype chat together some time?

Nomad 6R · Answer

yes .am waiting for the mouth wire from robi.i send mail to smarty, hope he respond.you have a jd humanoid?

Toyhackrobotics · Answer

Mouth wire? Oh you mean cable? No i don't have a JD, my avatar is my humanoid. Hey being in Belgium, does that mean you can understand German also?

Nomad 6R · Answer

i understand some german.whats your robot then,love to see him. yes cable.its a 4 pin cable.

Toyhackrobotics · Answer

Its just something i built from a bunch of brackets and servos, will do a showcase thread, just want to finish it first.

Nomad 6R · Answer

looking great.does he have his own controller or do you use an ezbv4? here a pic if you use an ezb,its handy for data.

Toyhackrobotics · Answer

Yeah EZB4 in his bacpac, 4-1 orientation sensor in his belt, Ultra Sonic Distance and Sound Sensor in his chest. Will control him with my phone first.

Nomad 6R · Answer

ah nice job.you still need to callibrate ? and what do you use as batt?

Toyhackrobotics · Answer

Calibration was all done before assembly, using a 2200mah lipo. Need to also find a 6v regulator for the neck servo, that's the only servo i haven't calibrated yet.

Nomad 6R · Answer

howmany volts are the servo's? and howmany volt is the batt?

Toyhackrobotics · Answer

Its a 6v servo, the lipo is 7.4v of course.  Better pic, last one was horrible.

Nomad 6R · Answer

servo 6 volt.do they not get hot ?

Toyhackrobotics · Answer

I wouldn't know, its only for his neck so i don't think it would get hot...but i haven't powered it on yet for i don't have the right regulator for it. Being a neck servo, i wonder if i could get away with putting 7.4v through it..its only rated for 6v and its very cheap so im sure it would go pop just by being plugged in?

Nomad 6R · Answer

did you try to use 5 volt regulator from shop here? i think that it will work.for your 6 volt servo's i have to talk to you later.have to make myself reddy for chemo, in a few houres. seeya

Toyhackrobotics · Answer

I do but its for one of the sensors, but that sensor can wait so will try it. Good luck for your chemo amigo.

Nomad 6R · Answer

thanks by by

Nomad 6R · Answer

tomy here the solution for the robi eyes.read this topic.they work on 3 rgb , connectors and have thousand colors.you can use 3 rgb windows. the adresses for each rgb connector are in the topic. topic robi eyes neon pixel bit

Toyhackrobotics · Answer

Thanks Nomad, just read that thread, very...very awesome.

Nomad 6R · Answer

starting to look good.

Smarty · Answer

its the same technic like a light-organ-effect. put a light between the speaker and sound-cable.. thats it. but be carefull.. use a resistor.. so the LED is never to hot. the eyes are selfmade :-) I cannot talk about all my tricks, because I'm selling the robots and that's a hard job :-).

Nomad 6R · Answer

smarty do you have a pic from led whit resistor?

Toyhackrobotics · Answer

@Smarty, ah i like the way you explained that, many thanks. In regards to a resistor, doesn't the EZB4 have built in 3.3v resistors? Smarty, your Kondo robot with the Robi head, his RGB eyes are really good, you have the colors working perfectly, thats what i would like to do with the small Robi i have here. I 100% agree with you there, if your selling robots then i wouldn't give out any tricks of the trade either...sounds like a dream job.

Nomad 6R · Answer

tomy i got 6 colors but not all are very bright.

Toyhackrobotics · Answer

Thats awesome Nomad well done. The colors are bright enough i think. Cool figure in the background.

Nomad 6R

Upgrade to ARC Pro