Hello everyone and first of all, scuse me for my bad english.
I am making this robot from about one year, and now, i am beginning to make this "run". This robot, has began to be made from an old Toy.
This was the original toy:
Thanks for EZRobot, i am doing a new robot very better.
I will show the progress here.
By odt
— Last update
Discover more robots
Cardboardhacker's Rc Car Ez-Fied
Modify RC truck to run dual DC motors with Sabertooth 2x12 and EZ-B V3, using gearboxes and standard servo steering...
Moviemaker's Well, It Is Obvious That I Did Not Sell My V3,...
Frankenstein scrap robot from Sunshine, Omni-Bot, RAD and electrical box, voice rec/gen works on desktop, sensors and...
Ezang's My New Robot Hand To Practice With - Video
Synthiam ARC controls a DIY robot hand with auto-positioning via Arduino Uno; servos glued for quick prototyping
@ nomad: Yes, the lcd is the original. I only have read the datasheet and connected it following instructions.
@Cupcakehat: I can not add lens to the eyes because the eyes are a hc-sr04 sensor and so, i can not cover this. This sensor, is important to return the distance between the robot and the things in front of him. For exeample, when the robot recognize a face, the hc-sr04 let him know how far is the face.
I hope you have understood.... i know my english is very bad...
I meant something along the lines of this, actually, but I can understand the confusion (I didn't word it very well)
then again you wall-e looks pretty good without this
sorry for the bad picture, I'm tired
Awesome update @otd.
I will be following your project @otd
very unique!(one of a kind)
my englich is bad too.i will try it too on my i-qbot.thank you
Added 2 front lights, a light sensor and a digital temperature sensor:
This is the gear for the front distance sensor:
Now, the robot, can walk itselfe and when light goes down, it can turn on some lights...... I will add more lights because these are not enough.....
looks cool. am working only at the body for now.
.....but why are you using two robots?