Hello everyone and first of all, scuse me for my bad english.
I am making this robot from about one year, and now, i am beginning to make this "run". This robot, has began to be made from an old Toy.
This was the original toy:
Thanks for EZRobot, i am doing a new robot very better.
I will show the progress here.
By odt
— Last update
Other robots from Synthiam community
JT's Jts Robie Sr.
Restoring a Robie SR for EZ-B-ification: raising height ~6 in, adding a turning/tilting neck, new paint, learning...
Steve70x7's Robot Albert E
Robot Albert E life-sized portrait head uses metal-geared micro servos for Bible seminars; exploring silent muscle-wire...
DJ's Multiple Robots With One Joystick
Control six robots with one joystick using Synthiam ARC and EZ-B controllers, synchronized head servos and per-direction...
Hello. This is an update. I am building the arms and this is the first hand. It's a very difficult job because i have very small space.....
very nice
Great picture. I like how I can see all of the important pieces like the gears and where the wires go into the shoulder. Nice work.
It is really difficult to make gears "hand-made".
are you gonna use elbows too.
Yes, i am building arms with elbows too. The arms have 6 axis and 2 telescopic parts, so, the arms can become longer and the robot can pick an object on the floor.
nice.you have two i-qbots?
Yes, i have used two robots.
I have a big problem now: I don't understand how to move two continuos rotating servos from visual basic..... I am not able to make them run left or right and faster or slowest. Reading the on-line sdk manual, i have not found the correct parameters to set........