odt

No Movement Detection

Hello. Uploading the C# example Movement detection, i can see my program running and connecting to Ezb and to usb camera. I can see camera images, but no object recognition........ I am missing something. Why i have not response?

Connecting Ez-Board

Hello. Is it possible to connect Ez-board to pc directly instead bluetooth? I am having many trouble with windows using an usb bluetooth dongle.... Thank you.

Continuos Rotating Servo

Hello. Can you please tell me how parameters i need to use for moving my continuos rotating servos in visual basic? I have tryed many ways, but i really dont understand what is the versus parameter (up and down) and what is the speed parameter (faster and slowest). Can someone give me an example please? Thank you and scuse me for my bad english....

Connecting Two Servoes On Same Output

Hello. I am asking if is it possible to connect 2 servoes on te same output. Can i do it?

Dimensions Of Detected Object

Hello and first of all, scuse me for my bad english. I will try to explain my question: When the robot detect a face, or a color, i can see on the screen, a bigger or smaller square. The biggest is the square, the nearest is the face (or the colored object). How can i in visual basic have the square dimension? Thank you very much. Ema from Italy.

Lcd Display

Hello. I have in my hand this little lcd display (it was into a toy i have disassembled): http://www.adrirobot.it/datasheet/speciali/pdf/GDM1602H.pdf Can someone tell me if i can use this with ez-robot? And can you explain how to connect it? Thank you very much. Ema

Servo Question

Hello and first of all, scuse me for my bad english. I am trying to use servos for the movement of my robot, but i see a bad thing. When servos goes in position i set, they have a vibration.......... For example, i set a servo in 60% position. It goes to the position and it start buzzing....... Do you have same problem? I am thinking using motors...

Hc-Sr04

Can someone please teach me how to use it in visual basic? I need to have sensor sending me a value when i push a button. How can i do?

Epilepsy

Hello. Am i the only one having some strange epilepsy behaviour on my robot? It happens to me very very often and i dont know why. Sometimes, cutting off power, shutting down Windows and restarting all, the problem seems to be solved, but very often, i need to off/on, off/on, off/on many many times..... I dont know what is the matter, but however,...

2.5 Amp Motor Controller Strange Behaviour

Hello. I have connected 2.5 Amp Motor controller exactly as tutorial explain. When i power on Ez-Board, a motor starts without no matter........... If i apply power to the robot without connecting pc, i have a motor running!....... It seems impossible. Where can i find the problem?

Unable To Connect Second Ezboard

I have installed a second EzBoard. It was new, so, as i did for the first board, i have updated the firmware. I have restarted my pc (Windows 8) and in the Bluetooth devices, i found my old Ez-Robot device (com 3 4) and a new device called linvor (com 5 6). Starting Ez Builder software, i select com5, but it is impossible to connect. I have tried...

Stop Pwm

Hello. I have installed 2.5 Amp Motor controller and now i am writing the code for controlling it. No problem for setting speed, but i am not able to stop pwm. This is the code i have used for setting speed and it works fine: Private Sub button2_click EzB_Connect1.EZB.PWM.SetPWM(Digital.DigitalPortEnum.D15, 50) End Sub This is the code i have used...

Automatically Connect To A Port

Hello. I would like my Visual Basic program to automatically connect to Ezboard when i launch the program. Ezboard connection is on COM port 3 on my pc, so i have written the code: Sub Form1 load Ezb_Connect1.Connect(3.0) ...but it does not work So i have tried Ezb_Connect1.Connect(3) ...but it does not work Can you help to solve the question,...

I Need An Help With Camera

Hello. I am still asking an help for another difficult thing for me. I am following tutorial installing and pairing the camera, but no success. I have put the dongle into the usb port of the pc and windows told me driver installed succesful. Launching ARC , i have no image, so i has opened the dongle for pairing with camera. I can see 3 leds on and...

Custom Interface

Hello. I have bought a Windows Tablet pc because i want to install it into my robot. I am totally new about ez control software, but i am able to program in Visual basic very well. Is it possible to have a custom graphic user interface? I would like to turn on the robot and having a custom menu on the tablet pc fixed to the robot, a menu friendly...

Help For Hardware Expansion.

Hello, and first of all, scuse me for my bad english. I have made two little robots for my little son. These were made on Arduino platform. I was very happy making these and my little son was very happy to use these! Now, i want do some more, so i have bought Ez robot, but i have many question about and i hope someone in this forum can help me. I...