New Ezbv Dont Connect

Question

i got my new ezbv but it dont stay connect only a few sec, then goes lid red

Dunning-Kruger · Answer

Reboot your computer, router and ezb and try again.... Is there a blue flashing led on the ezb? After you reboot, follow the tutorials on how to connect the ezb to your pc/network again.....

CochranRobotics · Answer

Your wifi is mac filtering to prevent your neighbors from hijacking as easy as they were before. You will need to add the mac address to the permit list in your router to use client mode.

Nomad 6R · Answer

hi bolt. d.cohran i forgot that.i have a look.

Nomad 6R · Answer

D.COHRAN i found login page engius.but i dont see the page whit my devices.

CochranRobotics · Answer

Get your own wireless.

Nomad 6R · Answer

ok itry that

CochranRobotics · Answer

I'm at the Dr right now and have a ton going on today. If you don't remember the password from that, I will have to send it to you tonight.

Nomad 6R · Answer

cohran is it get your own wifi or wireless and then admin? ah ok thank you

CochranRobotics · Answer

Admin Then either getyourownwifi or getyourownwireless

Dunning-Kruger · Answer

@nomad... Jeez, you got to write these things down so you don't forget....

Nomad 6R · Answer

RR i do take notes ,but i forget where i put it. login?

DJ Sures · Answer

It goes red because it is locking up - this is most likely due to missing an i2c device. If you are connecting to the EZ-B with the JD project open, and there is no RGB LED connected, it will lock up the EZ-B because there is no communication with the RGB LED device.

Connect to EZ-B with a new blank project and not the JD project - you will be okay.

Nomad 6R · Answer

dj i use a new project.i have to ad the ezbv4 on the ENginius page.

DJ Sures · Answer

Ah, I see! Okay

Nomad 6R · Answer

dj dont understand why my password is not accseseble. i gess i am not regitered.whits i did now.hopes it works. thanks all for the help.

Nomad 6R · Answer

cohran i try bolt none works.i saw message its blokked i spook to the people from engenius but they are more stupid then , a dog whithout head. only them can block me. what can i do?

Dunning-Kruger · Answer

Can't you reset the EnGenius back to factory settings and start all over again?... This time write down your login and password and put it on the fridge....

Nomad 6R · Answer

rr there are no settings,only after you login. for some reason its blocked iff you mean resetting the Engenius.am not touching that.

Dunning-Kruger · Answer

Google it, there must be a way to reset it... Perhaps you should wait for David to help you with this again.....

CochranRobotics · Answer

I am not able to connect at this time. I can get in touch with you tonight. I have more pressing matters that I am attending to at this time. You can reset to factory settings by holding down the button on the top of the engenius for 10 seconds but, you will then have to setup your network again.

Nomad 6R · Answer

rr i ask them to send reset mail,they anwser no need for register. i always use google. i didn make an error.they blocked me.i never bin on that page.

Nomad 6R · Answer

cohran how do i get on that page?

Dunning-Kruger · Answer

@Nomad... I have no idea what your are talking about but did you reset the EnGenius by pressing the button like David said? Perhaps you should wait until David can talk you through this...

Nomad 6R · Answer

rr yes my avening is ruin anyway yes i did 10 sec as he said. anyway i have to blow off steam. thanks

Dunning-Kruger · Answer

@Nomad you have to stop doing these kind of things.... Eventually no one will want to help you... You have to learn this stuff yourself and be very careful when you do things... We have a saying in English... measure twice and cut once... It means always check again before doing something so you minimize the chance of making a mistake... If you're letting off steam... don't throw JD, he won't be happy after that...

Nomad 6R · Answer

rr these things i dont learn.i cant explain why but it is so. i would understand iff no ones is able to help me,no matter the reason. one thing for sure there are to many changes for me to handle. so its the web page from ENgenius for sure. maybe i need to go back to lego. thanks avery one

Dunning-Kruger · Answer

ahhh who am I kidding... we'll always help you....

CochranRobotics · Answer

The site to posted is for engenius website. That's not your router. I can remember your routers ip address off the top of my head, but it will be 192.168.1.something. To configure your router, you will need to connect to your routers Web page so it would be something like https://192.168.1.254 I am with my wife who is very sick right now. I can't help you immediately and if you have reset your router, you have taken this from a 5 minute fix to a hour or more fix. Your situation is aggravated by having some smart but difficult neighbors who love to hack your wifi signal. I will try my best to get in touch with you tonight. My time is very limited with a sick wife and daughter who is having some issues, my normal job, my side job in which I am in the middle of recovering 12 TB of data and me just trying to keep my head above water. If I can't contact you tonight, I will at my earliest possible time. This not being a weekend makes it more difficult.

Nomad 6R · Answer

cohran dont worry .i got plenty off time. take care miss cohran.

CochranRobotics · Answer

we got nomads other ez-b on his network.

Nomad 6R · Answer

d.cohran thank you again for learning me these settings.

Dunning-Kruger · Answer

@Nomad... Now go write down your user name and password and put it on your fridge or your forehead....

Nomad 6R

Upgrade to ARC Pro