cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Ezang's Mr. Conehead Video For You To Watch In 2019
Mr. ConeHead 2019 video to watch, hope it's not too long
Tmesserschmidt's The Vision (Marvel) Robot Replica
Build a Vision robot replica using a mannequin, Vision costume, hacked Elvis bust, servos and an EZ-B; fitted costume...
Kenny's Everybody, Meet Phil:)
EZ-B powered 20-DOF PHILO humanoid: AutoPosition setup in hours, servo power tips, regulator heat and brownout notes.
what servo too, be a good idea like i did to make a part list with part # and where you got all your parts from ,like i have on my omnibot project,everything i add as i go will add a parts list and where i got the parts or photos of what i made too
I originally was going to use hsr 5995tg , but I'm thinking I may just use that one for the elbow servo and use the pololu power HD 240 oz on the shoulder , 240 x 5 is 1200 oz in , that's 4.6 pounds at 18 inches length from shoulder. Should be plenty to grab a drink or wine bottle. Yes I will put together a list once its ready for paint. Right now I just want to focus on getting the outside surface fabrication done and then I will be seeing red!!
Tonight's agenda! Install the robotzone shoulder servos! And well see what Jarvis looks like with his new and improved base courtesy of Sam! Thankyou Sam!
i going to use the hsr-5995tg,one big reason it lift much more weigfht if needed ,plus if not lkifting high weight it uses less current ,and since i bought 10 of them ,using one for the elbow ,so total is 4 rest is for my lyxmotion johnny five upgrade,johnny loves getting upgrades red color looks good,but going with silver or chrome paint ,since is a male robot not female type ,lol
Jarvis is not a girl , that would be black and pink or magenta or purple lol. I may take your advice on the servo for the shoulder , I might end up just buying two more of those servos , too bad they raised the price on me! Anyone need some new hitec 645mg servos?
i may need them,depends on the price ,since i did send you some stuff for free
see a good way to save on current is to use a much higher torque servo and run it at about half the torque you need so only using half the current,second if need more lifting power it has it if needed i do that for every design i make,unless it wont fit inside
Maybe work out trade
for what (dont think about the hsr-5995tg) i need them
JOSH so what are you looking to trade second i see you asked a about a video of mine running on floors,dont have a video camera,never had a need for it,BUT if you let me borrow your can do a video and send it back and you put up a video of your also love to see the jarvis moving around too