Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Goldenbot's Stickman JD Robot V1.1
Control JD Humanoid in Synthiam ARC with Stickman JD: 3D joint dragging, rotate view & floor grid, works with EZ-B...
Pirumpi's Ez-B, I Would Like You To Meet Nodejs
Control EZ-B robots from web and phone using a Node.js module via Synthiam ARC TCP interface with jQueryMobile and...
Mohanish's Making Of 4 Wheel Robot
Build a 4-wheel drive robot: parts, functions, sourcing, and step-by-step mechanical and electrical assembly for laptop...
mickey
sound great.it will take atleast 3 to 4 weeks before i have them.
mickey
the zoe eyes i have them ordered.i have 3 .
i made a zoe stand where you can slide in the body from the back.
SO COOL!!!
Maybe you can put the power supply inside...super nice!!
i can open it on the back side indeed ,good idea.
oops i forgot.the power supply is a batt from ez robot?MaH1300
Good morn all,
3 questions:
1 - One last time, using PETG, heat the bed up to_________________________ Fahrenheit
2 - I bought a creality glass bed, any insight instructions?
3 - Do I us hairspray with PETG?
thanks EzAng
hoi Ezang
the temp is written on avery box from filament,see above post. read the manuel from your printer and look for video's on youtube how to ad a glas.i think you need bigger clips to hold the glas inplace. you can use hairspray or 3lac or uhu.
you will need to test whats is best for you.