Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Doombot's Dirgebot V1
Dirgebot: 3 ft 4 in kid-friendly robot prototype with V3 board, webcam and W3 Iconia; seeking Synthiam ARC programmer...
Jeremie's R.O.B. Robotic Operating Buddy
Hack and modernize NES ROB using Synthiam ARC and EZ-B: RGB eyes, servos, IoTiny, LiPo, speakers, motors, scripts, 3D...
Bhouston's Inmoov's Touch Sensors
Build DIY touch sensors for robots in Synthiam ARC using foil tape on an ADC port and simple scripting.
i think zoe's eyes needs some diff controller.
use RGB's maybe ?
the eyes are bigger then rgb.
Use a ring of RGBs
see post #129 zoe's eyes.i think its best to follow the project. i hope i can learn alot.
:) OH zoe's body reddy.tomorrow printing the brackets.
@EzAng The head of ZOE is using the Raspberry Pi Zero, check the supported hardware... ARC can talk to the Raspberry Pi Zero and make use of the camera! ARC can make use of lots of different hardware, that is the great power of ARC!!
The Eyes are controlled by Python...please check the latest version of ARC, it is also supporting Python!
Lewan Soul servos are supported by ARC!!
Every single piece of hardware I am using can be controlled with ARC!
If you want to use the Iotiny or EzB4 it is not problem, it all works!! Just read the instructions DJ Sures provided here at the forum!!
@Nomad6R Great to see the progress!! Your prints are looking awesome!! So sad that those servos have such a long shipping, but I will help you to set up the Oleds and connect everything. Just let me know if you need any help!!