I eventually got around to installed a 7" screen and a lattepanda V1.1 on my InMoov to make it independent of having a external Windows PC or Laptop to run a project.
I put the ARC and project files into the startup program of Windows, so that on power up of the Lattepanda it boot up straight into the project, although a bit slow in actually loading ARC and my project from power on, it works extremely well.
The 7" screen is better than I expected to run Projects in ARC and navigating around windows if needed, I use a stylus pen on the touch screen display which makes it a lot more effective, but i wished now i purchased the 10" touch screen display rather than the 7" version
By cem
— Last update
Discover more robots
Dunning-Kruger's Ez Dog (Inmoov Frankendog Failure)
Failed experiment prototype; planning a new version with design improvements and fresh ideas.
Boon's Boon's Robot
Build a DIY Synthiam ARC robot with EZ-B: toy-car base, motors, steering, camera, sensors and PWM/analog battery...
Rob-Bot's My 1St Life Size Robot Build
Rob-bot life-size custom robot, battery-powered 6ft with heavy-duty servos, HD night-vision eyes, synced LED mouth &...
Great, I am interested in any videos you might have, I built the small metal robot in the robot section
@EZang60 Here are some older videos, before putting Inmoov on a platform.
https://youtu.be/PKyOOwuu5TM
https://youtu.be/jbcqf6MOlBw
https://youtu.be/qReg2Zf3x9Y
Thanks, I just came back, I will take a look
I have been watching Boston Dynamics robots -
watch this:https://youtu.be/_sBBaNYex3E and this https://youtu.be/LikxFZZO2sk
https://www.bostondynamics.com/
@Cem
Don't want to steal your thread here, needed to ask you a few questions about your Drupp neck build. If you wouldn't mind sending me a email when you have a few extra monents.
Thanks ... Herr Ball ... old-firefighter138(at)neo(dot)rr(dot)com