I eventually got around to installed a 7" screen and a lattepanda V1.1 on my InMoov to make it independent of having a external Windows PC or Laptop to run a project.
I put the ARC and project files into the startup program of Windows, so that on power up of the Lattepanda it boot up straight into the project, although a bit slow in actually loading ARC and my project from power on, it works extremely well.
The 7" screen is better than I expected to run Projects in ARC and navigating around windows if needed, I use a stylus pen on the touch screen display which makes it a lot more effective, but i wished now i purchased the 10" touch screen display rather than the 7" version
By cem
— Last update
Other robots from Synthiam community
Rb550f's This Iq My Personal Robot
IQ proof-of-concept robot: 4.5ft with telescoping camera head, Windows 8.1 chest tablet, EZB4 client mode, servo...
Steve's Meet Aegis
AEGIS robot built from junkyard scrap: steel box-section chassis, drain-chamber torso, car window twist motor, truck air...
DJ's ARC Overview
ARC robot software enables next-generation robotics with intuitive tools to build, script, control and troubleshoot...
Great, I am interested in any videos you might have, I built the small metal robot in the robot section
@EZang60 Here are some older videos, before putting Inmoov on a platform.
https://youtu.be/PKyOOwuu5TM
https://youtu.be/jbcqf6MOlBw
https://youtu.be/qReg2Zf3x9Y
Thanks, I just came back, I will take a look
I have been watching Boston Dynamics robots -
watch this:https://youtu.be/_sBBaNYex3E and this https://youtu.be/LikxFZZO2sk
https://www.bostondynamics.com/
@Cem
Don't want to steal your thread here, needed to ask you a few questions about your Drupp neck build. If you wouldn't mind sending me a email when you have a few extra monents.
Thanks ... Herr Ball ... old-firefighter138(at)neo(dot)rr(dot)com