This is a test, hard to balance Mr. ConeHead dancing
Take 2 soon :-)
By EzAng
— Last update
Discover more robots
Ptp's Ezb V4 Custom Firmware V2
Custom EZB 4 firmware with AP, client/station, HOST/EZB and ports configuration; beta fixes, polished UI and developing...
Jstarne1's Invisible Qr Code Project For Hackaday...
Custom invisible QR codes for discreet home marking visible only under 405nm UV or 780nm IR light; EZ-Robot compatible
Ezang's My First Video Of My Metal Arm Gripper Nov. 7, 2019
Control Mr. Metal arm gripper with Synthiam ARC and Arduino for precise robotic manipulation; initial demo and upcoming...
These experiments bring a smile to my face! Freestyle robotics is where it's at
If you truly want to get some bipedal walking motion happening you need an ankle joint, but I'm guessing you've already arrived at that conclusion
Yes, which servos for that?
look at your jd robot.foot D17/18 and D13/14
Thanks Nomad! I was going to suggest the same thing:
https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=104&productNumber=1210 https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=104&productNumber=1211
You might be able to get away with a DIY solution but the JD ankle/feet gives you the general concept.
ok I will look at that, thanks