This is a test, hard to balance Mr. ConeHead dancing
Take 2 soon :-)
Neopixel Blaster
— DIY NeoPixel Blaster for ARC - open-source controller for up to 8×80 LEDs (640), port‑0 onboard RGB, color control via ControlCommand
Try it →
This is a test, hard to balance Mr. ConeHead dancing
Take 2 soon :-)
Other projects from the same builder.
Robots the community built with Synthiam ARC. Get ideas for your next build.
These experiments bring a smile to my face! Freestyle robotics is where it's at
If you truly want to get some bipedal walking motion happening you need an ankle joint, but I'm guessing you've already arrived at that conclusion
Yes, which servos for that?
look at your jd robot.foot D17/18 and D13/14
Thanks Nomad! I was going to suggest the same thing:
https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=104&productNumber=1210 https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=104&productNumber=1211
You might be able to get away with a DIY solution but the JD ankle/feet gives you the general concept.
ok I will look at that, thanks