Com Port Manager icon Com Port Manager — Displays local PC COM/Serial ports opened by scripts, showing open/closed status (no communication logs); not the EZ-B UART. Try it →
Robot Showcase

Inmoov's Sensors

6,038 views 4 comments 1 video

About this robot

Thanks Rich, Richard R, and Luis for helping me with the scripting to get these sensors working.

By — Last update

More robots by bhouston

Other projects from the same builder.

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.

#1  

Bob, you're inmoov is great! I am so jealous. well a little jealous. I am still in the process of getting everything working on my inmoov. I'm not up to your speed yet but might be one day. I don't think as great as yours though.

thanks for sharing your videos are awesome.

:)

#2  

@Bob, Very nice! I want to get this ability into my full size B9. Can you post the script for this and the link to any threads on how you installed these sensors?

#3  

Here's the script for the Ultrasonic Sensors. I used two HC-SR04 Ultrasonic Sensors from EZ-Robot. They come with a voltage regulator which make them easy hook up. In the script you specify which ports the Ping and the Echo are attached to. I'm using 2 EZBv4's and have have them connected to Board #1. The servo movements in the script turn the head of the robot.


  
$proxclose = 65 # Change for minimum distance

:start

$proxsenseL = GetPing(1.d0,1.d1)

IF($proxsenseL < $proxclose)
ControlCommand("Personality Generator", PauseOn)

servo(d1,112)
servospeed(d1,2)
sleep(1500)
ControlCommand("Script Manager", ScriptStart, "Look for a human")
servo(d1,160)
sleep(4000)
servo(d1,112)
ControlCommand("Personality Generator", PauseOff)

sleep(9000)
endif

$proxsenseR = GetPing(1.d2,1.d3) 
if($proxsenseR < $proxclose)
ControlCommand("Personality Generator", PauseOn)

servo(d1,112)
servospeed(d1,2)
sleep(100)
ControlCommand("Script Manager", ScriptStart, "Look for a human")

servo(d1,50)
sleep(4000)
servo(d1,112)
sleep(9000)
 ControlCommand("Personality Generator", PauseOff)

endif

Goto(start)

Let me know if you have any questions.