All Community Content
ARC Pro is your passport to a world of endless possibilities in robot programming, waiting for you to explore.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Infrared indoor positioning for ARC robots: dual-camera tracks IR beacon, shows real-time heading, path and EZ-Script navigation variables
Featured
HERMY 19 in hybrid Attacknid/Robosapien, EZB v3 controlled with Robosapien IR script and custom locomotion panel, walks well with 2 in ground clearance.
question
Rc Remote Controll
Hi. Is there a way to use an rc remote controller to control the EZ-B ? Thanks.
2
2 k
MM1 |
question
Sabertooth In R/C Mode
Is there a way to use the control a Sabertooth in r/c mode rather than serial? I want to use it in conjunction with an r/c transmitter when the robot is not autonomous via the EZ-b (I'll use a multiplexer to do the switching). The problem I foresee is that I'll have to change dip switch settings each time I need to change from serial / EZ-b mode to...
2
2 k
rgordon |
question
Bluetooth Reset ?
Hi, is there a way to reset the bluetooth on the EZ-B ? I was connected to it with one laptop and trying with another Windows 7 machine and I cant detect it. Any ideas ? I have version...
4
2 k
DJ Sures |
question
Ez-Bluetooth Dongle.
Howdy! So, my Ez-package-of-so-cool-I-tore-it-open-with-my-teeth turned up today... I got straight down to it, set up the battery pack, got it all batteried up, then set about getting the Bluetooth adapter (available from the store) plugged in. Well, it pops up as a Device not Recognized. Then it says the Device failed. I've tried the dongle on...
5
3 k
BillDerwent |
release
Release 2013.02.11.00
Minor release adds EZ-Script math commands (aCos,aSin,Sqrt,Power), scrollbar save fix, improved floor map accuracy, Vuzix AR positional display.
13
5 k
CardboardHacke… |
question
Wild Thumper 4Wd Chassis With Gripper-Gear Ratio
I like the Wild "Thumper 4WD Chassis With Gripper". I just need to know what is its gear ratio and if it is available in stock. Is that from Dagu ? I found that one https://www.pololu.com/catalog/product/1565 but there is a big different in price. are they the same? if no, what is the difference ?
9
3 k
Mike |
question
My Software Friend Told Windows 9 Is Comming Soon
I woulder if its gong to be better then windows 7 or windows 8 He is a software guy hired by microsoft to check out mostly operating systems ,before the hit the market SO i woulder will it still work for EZB ,he said so far it looks better,but until he gets a copy of it and tell me about it i guess we have to wait and i guess after its out windows...
21
4 k
Troy |
question
What Is The Exact Model Identifier Of The Camera?
Hey, I notice the webcam does not work well with mac, just in bootcamp. The thing is I know it's a sonix camera, but I dont know the exact model, it's something along the lines sn9c20x no? I found a drivers page in sonix, but I need the model
3
2 k
DuxDucis |
question
Wirles Mic Question
anyone find a wireless mic to put in thier robot .yet thanks. cory
3
2 k
kkeast |
question
Cannot Start ARC- Gives Error
I could not copy and paste, has anyone had this error? Thanks Steve S. Unhandled exception has occurred in your application .... Could not load file or assembly "EZ-B. Verion=2013.1.5.0. Culture=neutral. PublicKey Token=83914fd54f35ea 1" or or one of its dependencies. The located assembly's manifest definition coes not match the assembly...
1
3 k
Steve S |
question
Servo Auto Position
Just wondering how the servos auto position. When you plug them in do they centre? or do you have to do it manually? if manually, please tell me how. Preparing for my wall-e project. Hope i'm not hoging the forums!
3
2 k
DJ Sures |
question
About Using Pot For Feedback Or Speed
Here is some info about using pots as encoder for motor speed its mostly for DAVE but info is for everyone IF you are looking to use a pot for speed of a motor as encoder its kinda hard Multiturn pots are high precision ,but not for feedback ,i dont know if anyone open up a pot but it has a stop inside and wafer and metal fingers,stop is one...
7
3 k
robotmaker |