All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Control up to 127 stepper motors via Arduinos mapped to ARC servos; supports any stepper driver, serial network, home calibration, speed/accel.
Featured
Sub-10 ft remote network robot: 47 mph, plow, flamethrower, remote start, trailer hookup, walks dogs, sentry mode with siren, telepresence
question
Speech Synthesis For Jd Robot
Is is possible to type text and then have the sound come out on JD? When I do use the speech synthesis module, the sounds comes out on the PC.
4
2 k
Dunning-Kruger |
question
Trouble With Simple Script
This is my first time using ARC and EZ-Script. I'm having trouble with what I think should be a very straight forward script. I have Revolution Six outfitted with an...
4
3 k
ignoblegnome |
question
Ez-Bits Parts- Only Availalble From China?
I started to take this issue through "Contact Us" but it really doesn't fit any of the categories there. When I ordered my Roli I ordered it with the EZ-Bits RGB LED Array and the Ultrasonic Distance sensor. I really didn't consider that every connection on them was going to be female and every connector on the Roli body was also going to...
3
3 k
Alan |
robot
Steve's Ez Robot Railroad Observation Car
Control an EZB4-powered camera observation car on a Silverton O Scale Railroad using EZ Robot and servos for live onboard views.
14
7 k
Dave Schulpius |
question
Setting Max Speed For H-Bridge Motors
Hi there. So, I have 2 drive motors running through a L298 H-bridge. I have set these up with a "H-bridge with speed control" movement panel and all is working well, but here's where I need a little guidance. At the moment the motors are controlled via joystick 1. I have the variable speed box checked and the sensitivity set right down to...
32
7 k
Steve G |
robot
Zikim's Can You Have Larger Servos And
Convert a robotic platform with larger servos and drive motors for row farming, using color-based plant detection to pull, hoe, plant, and weed
0
767
Zikim |
question
Hero 1 Parts
Hi all I didn't think I'd be gone for long after selling my EZ v3 and toys. Right now I'm implementing Arduino's on the farm to monitor and run the greenhouse. I just ordered a v4 kit and am going to put it on an old Hero 1 Chassis. Would anybody be interested in the old guts that came out of the hero? I've got all boards, wiring harness, memory...
3
3 k
Retrogadgets |
question
Parts For Your Products?
I have a stripped Left Foot white plastic piece on JD. This piece fits on the Left Ankle Servo & attaches to the Left Foot. This piece has a big hole on one side that swivels on a peg & the other side attaches to the Left Foot Servo. I ordered the whole Left Leg from you to get this piece & Mr. Lin from China I am assuming sent me the...
2
2 k
coryBlair |
robot
Ashley's A Robot That Can Fold My Laund
Robot that folds laundry and returns items to drawers, automating repetitive folding and storage tasks.
0
919
Ashley |
question
Icra 2015
ICRA 2015 Since Seattle isn't too far from ez-robots HQ's, any change of seeing you guys over there ? I hope so ! ICRA 2015
2
3 k
PhG |
robot
Moviemaker's Sunshine Is Back In Town
Sunshine robot returned - 4.5 ft tall (6.5 ft arms up), Version 1 with build and wiring photos; community-supported, ready for software tuning.
31
10 k
MovieMaker |
question
Introduction.
Well I guess it's time I make my introduction post now my ez-b is on it's way across the Atlantic to me (although going by DHL's tracking site it's coming from China not the US but who cares as...
9
4 k
Tony1952 |