All Community Content

Jd Webserver

Can I set the IP address of the webserver in my JD? My wireless network is 192.168.12.1, and I'd like my JD to be on that subnet. Thanks

Robot None Operational After Been Fully Charged

Hi I went through all the tutorials, calibrating the robot and was fully functional then the battery died. I put the robot on charge as per the tutorial guide and waited for the green light to clear. When i came to turning the Robot back on? Nothing? Could anyone advise? Thanks Kris

Bit Builder Link Wrong In ARC

I was going to look at the Bit Builder, under Project in ARC and the link to the " - STL Design Files and specifications for EZ-Clip, EZ-Robot Servos, EZ-B and other parts" is wrong as the hard coded link is: https://localhost:80/Community/Revolution/DesignFiles.aspx The external link I believe would be:...

Control Command In A Variable

Is it possible to insert a "control command" in a $variable? ex: $Female= ControlCommand("Speech Settings", SetVoiceGender, "Female") for now the result faults with "Missing String Quotes or Invalid Expression:" any idea?

Power Connect Plug

Received the developer kit today. It is not usable as is. The power connector plug will not go into the receptacle on the fuse base. The pin to inside diameter of the adaptor seems to be the problem. The supplied adaptor ID measures 2.14 mm. A similar plug with a 2.46 mm I.D. will fit. So take your pick either the pin is wrong or the adaptor is...

Additional ARC Requests

Hi. I have a couple of ideas for the EZ-Robot team to consider that I think would be a nice addition to ARC. 1. When adjusting the volume slider from 100 on an EZ-B soundboard, say to about 60 for example, when a project is saved, closed, and reopened the volume goes back to the default 100. Would it be possable to add the ability to save the the...