All Community Content
Become a Synthiam ARC Pro subscriber to unleash the power of easy and powerful robot programming
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Send web-triggered IFTTT events from ARC/EZ-B: configure Maker Webhooks key and trigger applets to control SmartThings, WeMo and other services.
Featured
Play Rock Paper Scissors with EZ-Robot JD using voice recognition, AutoPosition arm motions, object detection and game AI.
question
Neo Pixel Ring Tutorial
ooops! @DJ I was trying to upload the Arduino sketch, again into this tutorial and now after saving it, it is no longer public. I can open it but it doesn't show in the list of tutorials and the title has a line though it. What did I do wrong?
0
2 k
bhouston |
question
Ezb And Leds
I wish to control LEDs by EZB . I saw in a tutorial leds connected directly to digital outputs without current limiting resistors. The leds I'd use sink 70 mA at 3,3 V . I don't think EZB could withstand such currents ! EZB specs only say the pins are TTL compatible but don't say what's the allowable current (high and low level). What's the...
17
8 k
leonardo46 |
question
Hbridge
I have a Roli HBridge that has stopped working Forward on the Right Tread only. I have checked all wiring on EZB4 and the Hbridge. After a short run(3-4) seconds in Forward the Heat Sinked IC becomes very hot, enough to burn the skin. The Hbridge intermittently cuts in and out during this time. Any suggestions? Thankyou
6
2 k
Robojack |
question
No Connection Ezb With Blackberry Priv Android 6.0.1
Hello DJ, i have follow problem, i have a new mobile a Blackberry Priv with Android 6.0.1. I can connect this device with my EZB by WLan. But I can not call it in ARC Mobile there stands with Wifi SSID N / A. What is the problem? Thank you
10
4 k
lizpoir |
robot
Faengelm's Roli The Climber
HDD servo-powered arms and legs let the Roli Rover climb obstacles; simple script controls movement and servo activation.
9
5 k
Steve S |
question
Bing Speech Recognition Control Moves To Desktop 2 And Cant Be Moved
My Bing speech recognition control sometimes moves to the second desktop and I can not move it from there. I am right clicking on the window for the option but it does not appear once the control is on the second desktop. I can move all other controls as normal. Is this a bug? I believe it happened with the last update but not sure.
15
3 k
Perry_S |
release
Release 2017.06.12.00
Custom camera resolution option for high-resolution video processing; review the camera device manual to understand CPU processing limitations.
2
4 k
fxrtst |
robot
Bhouston's Another Inmoov Modification
Redesigned Top Stomach Pistons for quicker movement; updated STL files available on Thingiverse (thing:1047605)
17
10 k
Perry_S |
question
Size Of Ez Servos Thread?
I've lost the screws to the servo and cant seem to find a thread size that works.
6
7 k
Dave Schulpius |
question
Usb Camera Higher Resolution
I'm using the EZB over USB. So the robot will always be connected to the computer. If I have taken the load off the EZB (by not using the camera on the ezb)....
18
4 k
DJ Sures |
question
Rgb 8X8 Display
just a quick question, Will the new RGB 8x8 Display i2c address be changeable like the HT16K33 Animator (8x8) is, by shorting connections with solder.
9
3 k
DJ Sures |
question
Inmoov Ezb4 Where To Start
Hello Inmmov Builders, I'm new to EZrobot, I have just started my Inmoov project about a six weeks ago have the hand and forearm, bicep assembled and now working on the shoulder. I purchased the nervo boards from the Inmoov website and have completed as well all the soldering. After playing around with MRL and reading multiple forums on how to get...
2
3 k
Perry_S |