All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Kinect Body Control
Control robot servos with Microsoft Xbox 360 Kinect body tracking; map joints to upper/lower body...
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
Featured
Control UBTECH Alpha UBT-12HC smart servos via ARC using EZ-B v4/IoTiny UART, assign virtual ports, set baud, custom bits and position mapping.
Featured
Omnibot mated to Roomba: a cleaning robot using EZ-Robot kit with camera, servos, sonar and voice for autonomous or remote-controlled operation.
question
Hello,I Have Used Servomot
Hello, I have used servomotors from a developper kit (with EZ B 4) on a small robot and it works OK. Now I want to use GM9 motoreductors (Solarbotics) instead. So a got an EZ B H-bridge and noted connections used for Roli. But I suppose that I have to add some protections between the EZB4 and the H bridge ? Or elsewhere, so that no dammage...
7
2 k
DJ Sures |
question
Will A Single Autoposition
Will a single autoposition control ever be able to access multiple EZb's/IoTiny? For example I have 2 IoTiny's ,one in each arm of my inmoov operating the fingers, wrist and elbow. Right now I have to use 2 autopositon controls and then make a script to try and tie the action together. It's a little counterproductive.
10
3 k
DJ Sures |
release
ARC Raspberry Pi 2019.03.11.00
Auto position works across multiple EZ-Bs, letting InMoov robots coordinate poses and maintain consistent positioning.
0
4 k
question
Is There A Build Of ARC For De
Is there a build of ARC for Debian? I would like to know because I just put together a Debian laptop
3
2 k
DJ Sures |
question
Hi, I Have The Remains Of A R
Hi, I have the remains of a Robosapien v2 robot just wanted to know if it is possible to activate again with the controller and battery here are 2 pictures:...
8
3 k
EzAng |
release
Beta Release 2019.03.09.00
Fix for continuous rotation servo movement panel on Synthiam, corrects servo behavior to restore smooth continuous rotation.
1
3 k
robo rad |
question
Hi, I Purchased In Feb. 20
Hi, I purchased in Feb. 2019 a new JD robot, just used a few times Yesterday, I was doing the servos profile, the robot twisted up and said low battery (it was charged...
29
3 k
Nomad 6R |
question
Has Anyone Used This Module? N
Has anyone used this module? NEO-M8P-2 , it is avail for about 86 dollars not and it is RTK next generation that can kalman filter gps readings into a finer group and also connect to other NEO-M8P-2 to establish a point of reference for centimeter accurate positioning. I would like to get these into a outdoor robot so that I can setup a geo fence...
0
2 k
jstarne1 |
release
ARC Raspberry Pi 2019.03.09.00
Fix for continuous rotation servo Movement Panel on Synthiam - restores correct servo control to resolve movement issues
0
3 k
blog
Congrats Jim For Being Featured On Servo Magazine Cover
ARMadeus Mk. 12: large-scale robot on a wheelchair base with an anthropomorphic personality module offering...
0
3 k
robot
Jim's Armadeus Mk. 12
ARMadeus Mk.12 converts a power wheelchair into a modular robot base with EZB control, sensors, turret, arms, pneumatics and NERF launcher support
4
5 k
robo rad |
question
I Have Calibrated The Continuo
I have calibrated the Continuous Rotation Servos on my Adventure Bot according to the tutorials and all the tests work as expected. But I can only move one at a...
9
3 k
itsmeintorre |