Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Interactive camera control for ARC: click-to-center and edge hotspots to pan/tilt servos, adjustable fine-tune and multi-camera support.
Featured
Agricultural robot using EZ-Bv4 controller-migrate from Raspberry Pi to x64 Windows for on-board machine vision and USB-serial communication
question
Wifi Question
Hi, i have a robot i am building and want to have robot in 1 house and computer in my other house. I just got the wifi Uart-Wifi module(did not get it to work yet)is this a good path to take or...
11
3 k
pittom |
question
Omnibot 2000 On Auction Kings
On Discovery Channel now!
3
3 k
John_S4x4 |
question
Power Supply An Animation
Hi all, First, I'm very new to robots and controlling them. I'm currently building a full sized B9 "Lost in Space" robot with the aid from the B9 Builders Club. I heard about the EZ B over there and had to have one to control my B9. It seems to have everything I'll ever want. I'm sure I'll have tons of questions soon but here's the first...
3
3 k
Dave Schulpius |
question
Ez-B Life Length
With a risk of double-posting/missing something in the manual, I wonder what the life length of the EZ-B is? Does it have a specified one? What I'm actually wondering is could you run the EZ-B 24/7 for longer periods without a risk of it breaking? Thanks!
3
2 k
Henrik |
question
Cheap Complimentary Linear Slide/ Actuation Components
Hello! My name is Ben. I am new to the world of Robotics and super excited to get my hands dirty with a couple...
11
4 k
John_S4x4 |
question
How Do You Center A Servo In ARC?
In R/C hobby, when i plug any servo into any channel on a receiver, it is automatically centered, does EZ-B do that? if not how do you do that in ARC beside finding your servo min and max travel and set slider to center? How do you make it auto center?
2
3 k
FredoO |
question
Gps For Ez-B?
DJ, Anyone, Would this GPS work for interfacing with the EZ-B? https://www.sureelectronics.net/goods.php?id=99
0
2 k
Lumpy |
question
Ez-Robot Camera Question
Hello all, I have a question regarding the Ez-Robot wireless camera Is this camera considered an IP camera ( An Internet protocol camera) or just a webCam? thanks
2
3 k
winstn60 |
question
Camera Settings
Maybe I have a setting wrong and I have tried several adjustments, but when I have it in camera servo tracking mode and it is idle the screen is clear and the images are sharp, but when it starts to track and tries to follow the an object the screen gets green all over the place, and the camera does not track well any suggestions. Thanks
1
2 k
winstn60 |
question
Dual Axis Compass Module, Is There A Video On How To Wire?
Dual Axis compass module, is there a Video on how to wire? D.J. Maybe when you get back from the show and settle down, I would like to see a short video on how to wire this. I see the pinouts going from the board, but where do i hook them to the EZB? Just a little schematic would help. Thanks, Oh, maybe you also have one on hooking up the PIR, I...
12
3 k
robotmaker |
question
Hey Robotmaker! Have You Applied Yet?
This sounds up your alley. News link
2
2 k
Tymtravler |
question
Hello From Lloyd
Hello to everyone. I got back home from the hospital yesterday. My wife told me about her posting and I went to see all. I thank everyone for the nice comments , well wishes and prayers. I...
16
5 k
incols |