Robot Building Questions
Take control of your robot's destiny by subscribing to Synthiam ARC Pro, and watch it evolve into a versatile and responsive machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
Voice Activity Detec…
Real-time VAD using 300-3400 Hz FFT to trigger scripts on speech start/stop, with sensitivity tuning, live...
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Featured
Real-time 3D servo visualization with motion trails, interactive camera controls and clear trail for ARC debugging and analysis.
Featured
Convert a Roomba Dirt Dog into a servo-armed robot with EZ-B, camera, multiple servos, regulators, grippers and OLED eyes; power and wiring tips.
question
Script Help - Give Key Control Foreground
I have a "Key Control" in my project to provide shortcuts to numerous actions and scripts. Upon connection, I would like to give the "Key Control" focus so that I can control the robot from a BT keyboard without necessarily seeing the computer or using a mouse to select the control the first time. I thought adding this line to...
9
3 k
Dave Schulpius |
question
How To Run A Script At Set Intervals?
It seems like an easy thing to do but I cant quite seem to figure how to trigger a script at set intervals. For example if I want to run a re-calibration script every 30 minutes to home an encoder. I did this and put it in the personality generator but sometimes it will run the homing script a lot more then necessary. Any advice is welcomed.
15
6 k
Dave Schulpius |
question
How To Delete My Synthiam App?
I m unable to find a delete button to delete my ezrobot app. How to delete?
3
2 k
Nomad 6R |
question
Connection Question With Brookstone Rover V1
I am phyo and i have a problem connecting with Brookstone Rover V1 with ARC software it shows the error like this 19-Nov-14 11:56 PM...
17
4 k
Dave Schulpius |
question
E-Mail Notification Has Stopped
Hi EZ Robot, My email Notification has stopped and I haven't gotten anything for the past day or so. Is this broken? I know this happen once before. Maybe it's happened again?
9
3 k
Dave Schulpius |
question
Is There A Way To Connect A Led Matrix To ARC
i am working on building my first robot and i have 2 Bi color led matrix. is there a way to hook up the matrix to the ARC or do i have to use a I2C to connect it to an Arduino to control the Matrix? the Matrix i am using is Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack. i was able to get it to work with Arduino, but i want to send data...
2
2 k
Herr Ball |
question
Help,When I Write Any Commands Forward Wheels Moving In Different Directions
help,when I write any commands forward wheels moving in different directions
4
2 k
CardboardHacke… |
question
Odd Ezb4 Question. D14 And D15 Seem To Be Linked?
Ok, so one of my EZB4 seems to have an odd problem... I have 2 servos connected... one on D14 and the other on D15. If I send a servo move command on D14, D15 also moves to the same position. Likewise, if I send a servo command to D15, D14 moves in parallel... I tested 2 other ezbs and they seem to work fine... Also seems to be only D14 and D15...
16
4 k
Dave Schulpius |
question
How To Make Image Button Stay Color Until Direction Change?
This is just a question about something I came across. When using an image button in the ARC mobile interface, if you make the script "forward()", It doesn't change to the running color. If I add a sleep, it will change color until the sleep is done, regardless of a direction change. I tried the following script with no prevail....
5
3 k
CardboardHacke… |
question
2.5 Am Motor Controller. Blue Smoke Question .
After modifying the G-Bot's power supply to adequately power his neon transformer I decided to change the input voltage for the...
12
4 k
gwen4156 |
question
Running Ezbv4 Off Of Wall Power
does anyone have any ideas on how i can make a cord to plug into a power outlet and run an ezbv4 safely? I know the ezb takes 7 ish volts but i'm worried...
2
2 k
Dave Schulpius |
question
Auto Arrange And Gui Questions
When opening a project from the EZ-Cloud , an Auto Arrange popup asks to arrange controls for your desktop, giving you the choice. But when opening a project from the local PC, you are not prompted for auto arrange and it automatically does the auto arrange. Also noticed the " Controls " tab is not the same when a opening a project from...
10
4 k
Dunning-Kruger |