Robot Building Questions
With Synthiam ARC Pro, you're not just programming a robot; you're shaping the future of automation, one innovative idea at a time.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Persist and auto-load specified global variables between ARC sessions for consistent, personalized robot behavior and quick state restoration.
Featured
Giant-scale tracked robot using EZ-Robot board and Wall-E software with Sabertooth 2x12R/C, ready for sensors and WiFi camera upgrades
question
Face Recognition Working On ARC
Here is face recognition working on ARC shown by Mike our lead programmer.
90
13 k
thetechguru |
question
Continues Read Of Ir Sensor
Im a little confused here. I'm simply trying to read the value coming from my IR sensor (one of the Sharp IR ones). The script I wrote should should be a simple loop and display the value, can continue to display the value until I tell it to stop. goto(sensor) :sensor $IRSensor = GetADC(ADC4) # Sharp IR Sensor print($IRSensor) sleep(1000) Return()...
10
4 k
RoboHappy |
question
Init Start
in the init i can see the servo's d1 and d0 are set slower. i try to ad servo id d2 and d3/d7/d4 but they dont slow down. when jd goes in to calibrate postion it go's so almost violently fast. can this be changed ? thanks anyone
3
3 k
Nomad 6R |
question
Switching Polarity To A Dc Motor
Hello everyone; I'm assume it is possible, I need to have the EZ-b control a dc motor to the left and to the right, by switching polarity, between neg and pos,,,is that easy to do?
10
4 k
thetechguru |
question
Gripper Servo Foam Inserts?
Hello, I purchased a Gripper Servo and have it on my robot and set up but have some questions: The foam pieces that are included inside the gripper claws, are they...
2
2 k
DJ Sures |
question
Wait For Color, Wait For Face & Wait For Glyph In ARC Mobile?
Hello, I was using roboscratch in my mobile application and noticed the Wait for Color, Wait for Face, Wait for Glyph don't appear to work in mobile ARC application. Seems I read in one of the threads that Wait for Color works on Mobile Device using roboscratch but not Wait for Face, or Wait for Glyph detection. Am I correct or all wet? Seems I...
14
4 k
rbonari |
question
Digital Ports Voltage Output
Hello, We have been having issues with servo burnout over the last year with our original v4 EZB Robots. I have been spending a lot of my time researching and...
13
4 k
DJ Sures |
question
Dynamixel Mx-64T
Need help again with dynamixel servos! I was finally able to get all of my ax12a servos working. Now onto my elbow joints which use the mx-64t dynamixel servo which is ttl just like the ax12a. According to all information I find the servos can be wired together on the same bus. However I cannot communicate with it at all thru ARC. I have a feeling...
9
4 k
kamaroman68 |
question
Jd Camera On Remote
had some fun this morning.not only did i find an error and solved . and made the camera on remote. you will recognize the music,but for sabbam reason i cant play it in full.
0
3 k
Nomad 6R |
question
Fender For Roli
here a new idea for the roli.
22
6 k
Nomad 6R |
question
Six Feet:One Of The Walking Motor Is Not Working
Hi, Does anyone encounter any problems to make the six feet robot walking? One of the feet is not moving after successful playing it on four times. I have tried to change the pin, it looks like something wrong with the motor. Any advise?
1
2 k
CardboardHacke… |
question
Feather Request
is it possible to ad a resset button in this window. specially for the legs,when making poses sometimes i hear, loud noises.so a button like this would come in handy to set the servo back to...
0
3 k
Nomad 6R |