Robot Building Questions

Communication

I need help. Im trying to solve this comm issue for my son and keep striking out. I copied and pasted as much info as Ive collected, but basically it connects and then disconnects if I try to do anything. It seems as the ezb4 forces the connection to close, but the computer connection still shows the connection active. EZB 0: EZB 1: EZB 2: EZB 3:...

Size Of The New 8X8 Rgb Animator

@EZRobot is there any way you can confirm the size (length and width) of the soon to be released 8 x 8 RGB? I am altering one of inMoovs parts to use with it so I just need to know the size of it... Thanks kindly Richard

Right Shoulder Servo Not Working

Hi, We have used the EZ-JD robot the last couple of months with joy in our school. But suddenly the left shoulder servo will not function any more. We have tried to calibrate the robot, and tried to swap right and left shoulder port without any luck. Any tips, or is this a direct warranty claim?

Communication Between Ezb4/2 And Parallax Dhb-10 Motor Board

I am building my robot by starting with an Arlo base. I am using the new DHB-10 drive board that takes the place of the HB25 drives. The board accepts serial commands on what is label CH1. The board has its own processor and is pre loaded firmware commands that can be issued by its serial port. I want to issue these commands from my EZB4/2. I am...

Serial Communication To Vintage Rs-232 Device

Hello All, I am attempting to communicate to my Heathkit Hero Jr. using the Terminal EZB control. I have no trouble communicating with it via TerraTerm/Hyper Terminal. I have connected the TX on the robot to the RX line on UART #0 and the RX on the robot to the TX line on UART #0 and the ground to the ground on UART #0. The robot is using 5V logic,...

Mqtt And/Or Amqp

Any chance that the EZ-Robot software will support MQTT or AMQP? It would be great if it acted as the broker or as a client.

Controlcommand Error: Unknown Command For This Window: Scriptstart

I cant start Http Server using the code below: ControlCommand(HTTP Server, ScriptStart) Quote: Unknown command for this window: ScriptStart

F-30 Vs F-31 Six Package

Greetings. I am new to the community and have just received my first EZ-Robot product, a Six hexapod. What is the difference between an F-30 Six and an F-31 Six? The product on Amazon that I ordered (from a third party) was an F-31 - the number was shown in the photo - but I have received an F-30. Wondering if I should make a stink. The price was...

Looping Scripting Recorder Question

I need a little input. Im trying to use control command in a script to loop a 60 second prerecorded animation that used the scripting recorder. I have the ability to play forward and reverse, but Id like to be able to loop the animation indefinitely. Seems simple but i must be missing something.