Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Real-time servo position input via Arduino ADC over I2C; supports Nano (6 channels) or Mega (16), configurable I2C address and scalable chaining.
Featured
Voice-activated rolling robot, ezb-powered: mic, random-note speaker, ping collision sensor, moving arms/torso, head LED, sealed power switch.
question
Long Wires Use
does the use of long wires drain the batterie ? i have two new batt drain fast and charge fast.
4
3 k
Nomad 6R |
question
Rgb Animations - Turning It Off?
I'm back to experimenting with my standard JD and having a lot of fun with the RGB animations, but when I "stop" an animation JDs eyes stay stuck on his last animation screen so the LEDs no longer change but they don't go back to blank like I would like them to. I'd like to set his eyes to a blank all off state. Can I do that? I tried to...
11
4 k
Dunning-Kruger |
question
Image From Radar Window
i use an ping sensor with the radar window.do i cant see the red line, it makes ,just a chort piece.is this correct ? also can i use 4 ping sensors in one project ? thanks...
2
3 k
Nomad 6R |
question
Jx Pdi-6221Mg
Hi all new here im new to ezrobot and more used to arduino my question is will the EZ-B V4 controller run the JX PDI-6221MG servos? as they are 330hz and arduino servo.h cant run them. so looking at jumping on board with the ezrobot crew. many thanks for any advice.
2
2 k
phil196 |
question
Wire Wraps
If you ever lose a wire wrap, you can make your own with Mordie's easy instructions: https://youtu.be/fGts3x4-yS4
7
2 k
JustinRatliff |
question
Jd Sees Me
i finally found the face recognition.lots of fun.
1
3 k
DJ Sures |
question
Make Your Robot Follow You
hey, I am building a robot for the world makerfaire @ NY. and I cameup with tht idea of making my robot follow me, but i dont really know how to make it. Does anyone knows?
18
6 k
JustinRatliff |
question
Sizes And Fitting Data Of The New Rgb 8X8 Display, Neopixel Blaster And Neopixel
Waiting for the new RGB 8x8 Display, NeoPixel Blaster and...
2
8 k
Jeremie |
question
Reversing A Servo
Hi all. I want to reverse or invert direction of a servo. Have tried checking and unchecking the 'invert direction' box in servo control. Yes I have assigned the board and port and saved the settings. I am obviously having a senior moment so can someone point me in the right direction? Regards to all.
8
3 k
Dunning-Kruger |
question
Faulty Left Ankle Servo
I have just received my new JD this week and immediately with switching on I had a problem with the left ankle moving to to max position and jittering. I tried to compensate by adjusting the profile without success. It has now been confirmed that port 14 on the control unit is faulty... I temporarily plugged the left knee into port 14 and it goes...
2
2 k
Bonepole |
question
Best Apps For Inmoov Robot
Hi, I just purchased my ezb for my Inmoov robot. I don't really know how to use ezb that much but will learn! I'm here to ask for the best apps to use with Inmoov (that are for the ezb obviously) so please post links. Thank you
10
4 k
3dfixer |
question
Vintage Tomy Robots On Ebay
Just wanted to let anyone know who is currently looking for Tomy Omnibot 5402's and Omnibot 2000's, there are many listed at the moment, some in very good condition...
1
3 k
Toyhackrobotic… |