Profile Picture

pranav

Country: India
Member Since:

Achievements

  • 2012-12-15 - Joined Synthiam
  • 2013-03-14 - Created First New Discussion
  • 2013-06-10 - Joined First Discussion
  • 2013-10-06 - Answered First Forum Question
  • 2014-02-01 - Created First EZ-Cloud App

Latest submissions

No behavior controls for ez-builder have been shared yet.
No Synthiam robots have been shared yet.
question

Best 3D Printer

It's been a long time... How's everyone? Josh, Rich, DJ, Aameralis... Guys, I'm planning to buy a new 3D printer. There is no limit on the budget. Which 3D printer do you think is the best one to buy. I need high quality printing and I'll be using it almost everyday... So I need all your help... Please let me know which one's the best...
question
Idea For My New Bot

Idea For My New Bot

Back to community after a long time due to my graduation final exams. I'm excited to start building robots again... I want to make a new...
question

Drive Trains

As more and more people are starting to use different drive trains for their projects, I thought we can have a thread where everyone can post about the drive trains they are using and the modifications they have done. It feel it will be very useful reference for all those who would want to start a new project...
question

Ez-B V4 Needed Urgently.

Guys, by project NOVA is on hold as my EZ-B is damaged... I need an EZ-B v4 in a week... Can anyone kindly sell it or let me know if it is available in any of the sites?
question
Waiting, Waiting & Waiting.

Waiting, Waiting & Waiting.

Eagerly awaiting for the results of the lucky draw...
question

10A On Ez-B

I got the voltage regulators 1084-5.0 now. As this voltage regulator supplies the power only to the 5V and doesn't reach the microcontroller, is is okay if I use two of them in parallel to get 10A output on EZ-B to drive all the servos, this way I can avoid external power supply to the servos... Can the etching of the EZ-B take 10A?
question
Guys Name It.

Guys Name It.

This is the robot we made out of foam board... Inspired from Omnibot 3000... Guys please name it...
question
Voltage Regulator For Servos

Voltage Regulator For Servos

I need to provide external power for the servos as I'm using a lot of them. Can any one suggest any voltage regulator for the external...
question

Ez430 Chronos Question

Hey guys, My ez430 chronos works alright with the chronos control center, but when i try to connect it to ez-builder, as soon as I click the start button, it goes back to stop immediately... There is no error message in the debug too.. So what am I suppose to do?
question

Revolution In Personal Robotics

I was on a long break, a kinda pilgrimage. And now I come back and see... Only one thing came into my mind, just like the way Apple brought a revolution in the era of Personal Computers, now its EZ-Robot.. that's bringing a REVOLUTION in Personal Robotics. I'm pretty sure that EZ-Robot can bring about a mutation in the very structural nature of the...
question
Heavy Duty Motors.

Heavy Duty Motors.

I am interested in building an Omnibot 2000 or Omnibot 3000 from the scrap... Using fiberglass... But I would like to know which motors...
question

Wireless Camera Driver

Hi Everyone, Right now I have a very old lappy which runs on Windows XP... So it can't install drivers on its own.. I need the driver of the wireless camera that comes with the EZ-kit.. Can any one guide me please...
question
What Capacitor Is It?

What Capacitor Is It?

Yesterday when I was looking at my EZ-B, I observed a new kind of Capacitor in the place C1 of EZ-B... I have known about electrolytic...
question

Contact Us Functionality

I was trying to approach EZ-Robot Contact Us.. When I typed the message it is redirected to a page saying I would receive an e-mail to my Id... I even checked in spam.. I couldn't find any... I tried it thrice yesterday and twice today.. Is it under maintenance or is everything's fine?
question
The Astounding Power Of Quadcopters.

The Astounding Power Of Quadcopters.

I was watching this video and realized how versatile these things are... The world is waiting out there for new talent...
question
Red Light On Camera.

Red Light On Camera.

Just now I connect the wireless camera to EZ-B and there was a red light along with the normal blue light on the camera... It immediately...
question
Ez Controller Circuit

Ez Controller Circuit

Hi @DJ, I'm having fun making EZ-Robots... But I was wondering if we can get a circuit diagram of EZ-Board?
question

Power For Heavy Duty Servos

I know I ask all silly and stupid questions... Thanks for everyone for answering me with patience... I will be using 6 heavy duty servos and four normal servos.. As I can't get enough power from the battery pack connected to EZ-B, how am I suppose to give an external power for the servos? I will be using a 11.1V Li-ion battery with amperage of...
question

Wireless Camera Question

When I connected the wireless camera to EZ-B, the fuse between the heat sinks burnt out... I guess it might be due to the some wrong connections... What should be the connections for the wireless camera.. As I imported the kit, the battery from the camera was removed... How should I supply the power from EZ-B and make it work?
question

Motor Driver L298n Or L293d

Can we use the L293D H Bridge instead of L298N H Bridge? Is the EZ-Builder compatible with L293D? Please guide me as how to connect it to EZ-B...
question

Alternate Way To Power Up Ez-B

My EZ-B was working till last night.. Today when I powered it up.. The both LEDs glowed for a second and then it stopped powering up... Is there any alternate way to power up EZ-B than powering up it with the barrel jack? Or is there any other way to power it up through the barrel jack? What am I suppose to do?
question

Wall-E Using Coke Cans.

Hi everyone, I'm building a Wall-e using Coke cans and other scrap... But I need to find a way to design wall-e wheels.... Can anyone gimme some ideas....
No live robot hacking sessions have been shared yet.
No user tutorials have been created yet.
No apps have been created yet.
No firmwares have been created yet.
No 3D Parts have been created yet through EZ-Builder.