jackphillips1953
Country: USA
Member Since:
Web Programmer with .Net
Achievements
- 2012-12-06 - Joined Synthiam
- 2012-12-14 - Created First New Discussion
- 2012-12-21 - Joined First Discussion
- 2013-04-17 - Posted First Project Showcase
- 2014-10-29 - Attempt Helping Forum Member
- 2015-04-14 - Connected ARC to cloud
- 2015-05-01 - Created First Robot App
- 2015-12-04 - Shared First Photo
- 2018-01-15 - Used Cognitive Vision Service
- 2018-03-13 - Shared First Video
- 2018-08-31 - Used Cognitive Face Service
- 2018-09-21 - Used Bing Speech Recognition
Latest submissions
Skills (0)
Robots (4)
Questions (24)
Hack Events (0)
Tutorials (0)
Apps (1)
Firmwares (0)
3D Parts (0)
Feature Requests (0)
No robot skills have been created here yet. Click here to view the Robot Skill Store.
robot
Jackphillips1953's Warehouse Distribution Robot Prototype
Here is the prototype of robot I am testing for warehouse distribution. Nothing special at this time...
30
6 k
samdenson |
robot
Jackphillips1953's Inmoov Project
This is my InMoov Project which is a downloadable open source 3d printing project that I am working on. Robot is life sized. I am using EZ- Robot and EZ...
16
6 k
jackphillips19… |
robot
Jackphillips1953's Inmoov Project
Using EZ Robot for controller.
14
4 k
irobot58 |
robot
Jackphillips1953's 6 Servo Arm Using Vb.Net, Visual Studio 2010 Code And Video
Hi, I am writing a lot of code for EZ and I would like to share...
1
3 k
DougPope |
question
Pull Wi-Fi Data From Ezb
Has anyone been able to pull Wi-Fi data from controller. In other words I would like to be able to get a list of all Wi-Fi stations, get the DB from the station. If possible it would be used for indoor navigation. If not then I guess use a ESP8266, pull the data serial, then do the work to determine location. It would be easier to pull from EZ...
3
499
DJ Sures |
question
Is Sabretooth Serial Still Supported?
Hi, I haven't used the sabretooth control in a while. I remember settings that I could use. Seem to be gone now. If I need to use movement panel how do I wiring up? I would like to be able to use with mobile interface. Thanks.
6
756
DJ Sures |
question
Overlay Not Working On Mobile App
Overlay not working on mobile app. Is it even possible to run on mobile? Also unable to get tracking to work on mobile.
4
730
Chelsea |
question
Can I Get Data From A Webpage?
I would lie to be able to read sensor information hosted by webserver. I have multiple Arduino sensors that use ESP8266 as web server. I want EZ Robot to read and I can parse out information or the ability to read this and say out loud. Example using my InMoov ... I say get outside Temperature and InMoov reads the web page hosted by ESP 8266 and...
2
789
jackphillips19… |
question
Mp1584en Dc-Dc Buck Converter
Hi, I am working on Roomba and InMoov projects. I needed something to step down power from 12VDC for sensors on InMoov and Step down power from Roomba to EZ B....
4
2 k
jackphillips19… |
question
Mind Storms Lego
Has anyone wired an EZ comtroller to a Lego Motor? If so how? Thanks.
10
3 k
DJ Sures |
question
Creating Plug In
Hi, I posted this yesterday but did not show up for some reason. I am creating my first plug in. Followed the tutorial completely. I keep coming up with the same error constantly. CA0055...
20
4 k
DJ Sures |
question
Call An Auto Position Script
How do you call an Auto Position script from another script. There is no way I can see to name an auto position so I can call different ones at different times. Am I missing something here? A quick search doesn't give any examples. Thanks.
3
987
jackphillips19… |
question
Coverting Project From V3 To V4
Hi, I am converting a project from V3 to V4. Few Issues 1. Servos not positioning in same position. If servo centered before it in certain position it is way off now. 2. Servos not releasing. Same script in V3 no issues. 3. Servos jumpy. Not as smooth as V3 Wireless router right next to project. No change in script just moving jumper to jumper same...
9
2 k
thetechguru |
question
Unable To Connect To Ez Module
I am unable o connect EZ Module. Using version 2015.12.03.00 Is there firmware upgrade I am missing? Thanks.
2
2 k
jackphillips19… |
question
E-Z Builder Interface
Hi, What happened to the interface? Using Win 7 here with multiple monitors. Last couple of versions unable keep controls in same place after saving and reloading. Unable to use...
6
2 k
Dunning-Kruger |
question
2 Cameras, Misc
Hi, A couple of questions. Has anyone been able to run 2 cameras at one time? I would like to use one camera fro EZ Face and the other for whatever... Has anyone been able to come up with a way to recognize sound... maybe an alarm or breaking glass? I have a glass breakage sensor I may use but I would like to be able have the robot recognize sounds...
19
3 k
Rich |
question
Inmoov Robot Update (Hand)
Hi, Hand working with voice recognition. Using one EZ control just for arm movement for now.
10
3 k
stonewolf |
question
Scripts Multiple Boards
Hi, I am trying to write a script to control servos on a second EZ board. How do I address a second board. Control at D0 on main board is Servo(D0,100).... what is the command for a second or third board? Thanks.
7
2 k
tevans |
question
Multiple Ez Control Boards
Hi, I doing the InMoov Project as I uploaded and discussed in an earlier post. Some of you have every complex robots and probably know the answer to these questions. This robot will have in the foreman alone 6 servos.. in each arm. The head and neck at this time 3, the shoulder 2, and each bicep 2. I will have over 20 servos and that does not...
6
931
jackphillips19… |
question
Servo Movement
Hi, I am using multiple HS-805bb Servos. I can not seem to get full 180 degree movement using the servo controller. Is there another controller that works better? See image for specs on...
10
3 k
jackphillips19… |
question
Inmoov Project Update
Hi, Connected head to torso. Working on arms and hands next. Having issues with tracking. Movement jumpy and inaccurate.. suggestions welcome. One eye operational, other eye hope...
10
3 k
Antron007 |
question
Tried To Get Off Of Solar Panels With Thumper
Made this attempt with Thumper today. Snow plow was a 3D printed part using Makerbot. Thumper does not have the power or the...
10
3 k
jackphillips19… |
question
Camera Not Working
This is the second camera purchased from EZ robot in 2 months. First died after 2 weeks. One in video died after first time use. Will not stay on as shown in video. Tried holding...
1
866
DJ Sures |
question
Camera Not Owrking
Camera was working fine for a couple of weeks. This morning dead. Tried repairing as per video and it seems to connect ok, just getting black screen. Any suggestions?
0
846
jackphillips19… |
question
Servo Speed Control
Having problems with speed control and couple other questions some one may have answers to. 1. EzB_Connect1.EZB.Servo.SetServoSpeed(Servo.ServoPortEnum.D3, 90). Does 90 mean 90% of power. If so it is very slow. I notice that in the Servo Speed Control it uses 0-9. The lower seems to be the faster speed. Do I use 0-9 for the VB command? 2. How do I...
1
2 k
DJ Sures |
question
1938 Erector Set For Parts
Just found 2 1938 Erector sets for parts. Perfect for Robot building! Seems all parts are included... One heck of a find!
3
2 k
jackphillips19… |
question
Extra Cables, Servo Arms Etc.
Hi, Where is a good place to look for extra cables brackets etc. I have no cables especailly for things like the sound sensor that has an extra cable it requires....
2
893
jackphillips19… |
question
Line Following Robot
Hi, Has anyone done a line following robot with EZ? Does anyone thing that you could possibly use the camera facing down and use the tracking mode?
0
905
jackphillips19… |
No live robot hacking sessions have been created here yet. Click here to view the past live robot hacks.
No user tutorials have been created here yet. Click here to view all user tutorials.
No firmwares have been created here yet. Click here to view robot hardware and firmwares.
No 3D Parts have been created yet through ARC. Click here to view 3D printing robot library.
No features have been requested yet.