Profile Picture

Zxen

Country: Australia
Member Since:

Achievements

  • 2015-08-20 - Joined Synthiam
  • 2015-08-20 - Created First New Discussion
  • 2015-09-11 - Connected ARC to cloud
  • 2015-09-13 - Joined First Discussion
  • 2015-09-13 - Attempt Helping Forum Member
  • 2016-05-19 - Shared First Photo
  • 2016-07-05 - Created First Robot App
  • 2016-09-16 - Posted First Project Showcase
  • 2016-09-23 - Created Custom Avatar
  • 2017-01-31 - Shared First Video

Latest submissions

No robot skills have been created here yet. Click here to view the Robot Skill Store.
question
Vuzix 2016 Compatibility

Vuzix 2016 Compatibility

I've explored the forums for headset info but the answers are not solid and seem outdated. Is there an up-to-date list of which headsets are compatible with the EZB and EZ...
question
Ezbv4 Modifications

Ezbv4 Modifications

I have needed to reduce the size of my EZB because it did not fit nicely in my robot. So I removed the power base. Unfortunately, desoldering the power terminals from the EZB wasn't...
question
Camera Head Tracking

Camera Head Tracking

I need to extend the camera from it's circuit board and mount it in something like a cable dot on the side of the head facing forward. At the moment she looks borg. Not good. This...
question
Soundboard (Pc)

Soundboard (Pc)

What is the Soundboard (PC) window for? There is no editor. Obviously I want to choose this one rather than (V4) because the sound is better. I want my robot to dance to Vogue by Madonna.
question

Soundboard - Getting Mp3s

www.loudtronix.me automatically converts youtube videos into MP3 sound files for you so all you have to do is click 'Download'. I highly recommend it.
question
I2c Servos Instead Of Pwm Servos

I2c Servos Instead Of Pwm Servos

I'm developing new servos with a mechanical engineer and we've decided to make them i2C to reduce the number of internal wires per module. How do I run...
question
How Can I Plug These Servos Into The Ezb?

How Can I Plug These Servos Into The Ezb?

How do I plug these servos into the EZB please? http://www.active-robots.com/high-torque-dc-servo-motor-60rpm-with-uart-12c-ppm-drive
question
Can We Buy An Ezb Camera With A White Lens?

Can We Buy An Ezb Camera With A White Lens?

The black plastic around the lens of my EZB motion tracing camera is an eyesore on my white robot. Also, it is only 640x480. I assume...
question
What Is The Best Remote Control Solution For My 30Dof Robot?

What Is The Best Remote Control Solution For My 30Dof Robot?

Hi there, I would like to control my Humanoid Robot (custom robot with 30 degrees of freedom - 2...
question
Short Circuit / Melted Fuse

Short Circuit / Melted Fuse

I have been blowing the 20A fuse of my EZBV4 power base while plugging in servos. I just figured out why (and I'll tell you why I've been making a stupid mistake): I...
question
I Have Just Decided To Try Replacing All My Servos With Steppers

I Have Just Decided To Try Replacing All My Servos With Steppers

Can someone please tell me everything I need to buy to replace my servos with stepper motors...
question

Ezb V4 Turns Itself Off Whenever I Send A Command

Every time I move a servo through WiFi the ezb v4 makes a chime like its starting up but its really disconnecting. I tightened the female connectors (I dont like the dean prongs - the base doubles the size of the unit for no reason). I thought this might be due to the 6V20A power supply I had begun using instead of 7.5V48A I was using previously...
question

Servo Power Source Questions

Hi, My first question is about whether or not its fine with 24 servos to twist all the red wires together and all the black wires together so you end up with 26 wires - 24 data + 2 power. I will use a 7.5V46A power supply to provide power to the servos. The data lines will hook into my EZBV4 Microprocessor. It seems like the obvious answer is 'of...
question

Orientation Sensors To Create Intelligent Servo Feedback

Hi, Can the Orientation sensors be placed on each servo motor so that you can move robot arms into place and save a frame without needing to use screen controls? I want to be able to easily move the arms, head etc into each frame/pose to create specific choreography.
No live robot hacking sessions have been created here yet. Click here to view the past live robot hacks.
No user tutorials have been created here yet. Click here to view all user tutorials.
No apps have been created yet. Click here to view all user robot apps.
No firmwares have been created here yet. Click here to view robot hardware and firmwares.
No 3D Parts have been created yet through ARC. Click here to view 3D printing robot library.
No features have been requested yet.