All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Efficient ARC Variable Watcher - lower CPU for large projects; slow initial array render but faster updates; shows name, type, value, length
Featured
EZ-B controller simplifies telemetry-suit Cyborg Zombie setup-controls servos, cameras and speakers for a mobile robot surrogate; add two-way audio.
question
Robot Currently Operates By Time - What Would Be A Good Upgrade?
Hello there I am part of a robotics team. every year we get avrious challenges and travel to a competition. the challenge in the competition changes each year. last year we had to pick up milk crates and put them into various places. when the round starts, there were 15 seconds on which the robot drives autonomosly, and 2 minutes after that was...
1
2 k
DJ Sures |
robot
Jeremie's Fridgebot
Magnetic fridge-clinging robot using IoTiny, magnets and microservos for climbing, surveillance, whiteboard cleaning and duct/pipe inspection.
49
7 k
Jeremie |
question
Another Dynamixel Servo Plugin Request
Robots (Mfg. of Dynamixl servos) has released their "TurtleBot 3" kits. "TurtleBot3 is a small, affordable, programmable, ROS-based mobile robot for use in education, research, hobby, and product prototyping." (From Robotics) These kits include a Robotics OpenCR board to control the servos, a Raspberry Pi (with camera) as...
4
3 k
OldBotBuilder |
question
Alternative To Speech Recognition As A Fail Safe Method
I am looking to use JD as an assistant in a comedy show I am doing for children. I know the children can create a lot of noise. Therefore I need to find the best fallback if speech recognition does not work. Is a keyboard shortcut the best alternative?
5
2 k
DJ Sures |
question
Questions Connecting To Robots Wifi
All our robots seem to have issue connecting the laptop to the robot wifi. I have ran updates on ARC latest version installed 2018.09.30.01and it then shows update available but when i download the latest version ending in 02 in doesn't install? When trying to connect the laptop to the robot the connecting always times out? Any help on getting...
1
2 k
DJ Sures |
release
Release 2018.09.30.02
IoTiny & EZ-B v4 firmware report Synthiam ARC client on D7/D23; auto-position speed, RGB/8x8 I2C index fixes, speech synth rate fix
9
4 k
Dunning-Kruger |
question
Omnibot 2000 Riser
Want to make your Omnibot 2000 bigger? You can print this out and stack em up to the height you need your little guy to grow. The vertical striations are because I only printed it one...
7
4 k
MovieMaker |
question
Servo Recorder Control
The servo recorder is great but only seems to playback any servos only connected to Board 0. I can record from Board 1 using the servo pad control ( it shows data) but it won't playback the recordings of those servos connected to Board 1 or any other board (1-4). Am I missing anything obvious or is the servo recorded control only for board 0? I am...
7
3 k
DJ Sures |
question
Question With Synbot
Hi @Jlucben, I used Program O with AIML (because it work with french language) but I am interested by Synbot. I installed the plugin and followed the tutorial for the installation...
7
2 k
reaktor |
question
Vertical Mounting Of Ez-B4, Hero-1 Reboot
Good Afternoon Community! I'm making slow but steady progress on rebuilding my Hero-1. I have a question: Has anyone run in to issues...
50
5 k
DJ Sures |
question
Servo Control Voltage
I don't have a scope to verify this but would I be correct in assuming that the servo control voltage going to the servo is 3.3 volts on any particular digital port that a servo is connected to on an EZ Controller? The power to the servo would be the battery voltage that the EZ Controller is powered up from which is typically 7.2 Volts? Thanks...
1
2 k
DJ Sures |
blog
Canadian Prime Minister Gets Schooled With EZ-Robot
PM Trudeau experiences an EZ-Robot from Science North as federal grants bring EZ-Robots into classrooms across...
0
2 k