Here are a few Roman the robot pics
video coming soon
Roman the robot New Robot 2020 Arc software: I am using an Ezb4 controller, battery, a EZrobot 1300 with four Ez 360 HDD servos for the two arms with 4 servo City gear boxes - 4 servo City channels for arms a iotiny controller / battery, a EZrobot 1300 for camera servo, and two 996R servos for the 2 servo City grippers An Arduino - with a shield /power USB off my laptop 2 Micro servo Motor for the eyes, a Micro servo Motor for the mouth and a 996R servo for the DF-Robot rotation hex base 2 servo City plates for front of robot Using a stand I had and a shirt. Four 13.5 servo City channels to form a platform for the head and accessories. Misc. mask with hair, Styrofoam head cut, hot glue, screws, nuts, wire, servos, eyes, extensions etc
EzAng
Other robots from Synthiam community
DJ's DJ's Omnibot 2000
Rural's My Experiment 626
I like the movie I am mother here is the files for this design. alexia for the voice or even google would be excellent. you can plug in google as it has a audio plug out. https://www.thingiverse.com/thing:3807583
I was thinking of some movement options
I can use Aiml Bot for audio random talking, not sure how to use Alexa voice
Thanks for all your help, all of you
EzAng
@EzAng Hi On the Alexa home device there is a 1/8 inch audio out jack. you can get a two male audio cable one end into alexia the other into microphone audio in jack on your computer so ARC can use alexia voice and alexia voice will come out of the speaker on your Robot.. another way is to use a scary terry audio servo board to control the mouth servo if you have a mouth and or lights and you can put the alexia home directly in the robot. using the scarry terry circuit board. DJ made a demo on connecting alexia to an EZ-Robot v4 Controller and I think Will did it with Allen.
hi ezang
great topic.how printing going?
Hi Nomad, just got in my magigoo to print today possible. Been so busy, haven't had time to mess with the printer yet.
How is your printing going?
nallycat - I am looking for the link for - DJ made a demo on connecting alexia to an EZ-Robot v4 Controller and I think Will did it with Allen.
now I use the talk servo for Mr. Roman
thanks
EzAng
So far all my prints are popping of while printing - what can I do?
EzAng
does the nozzle knocks off the print?
I think so, the print does not stick
How high should the nozzle be?
EzAng