cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Pittom's Rc Rock Crawler
Here is what i got so far axail xr10 rock crawler novak m2 dig esc with dual 55t motors extended chassis made from...
Jeremie's Ravage The VHS Tape Robot
Here is my VHS tape robot named Ravage by @JustinRatliff Its named after the G1 Transformers Decepticon cougar robot...
Lumpy's Lumpy's - R2-D2 Build Two-Two's
Hello Again, Ive been asked to post some pics of my R2 build. Ill toss them up. This has been approx. a 3 year project...
same one SAM bought and she said the display not working only try and see if it works ,but remember only hook up yellow rca
only thing i can think why that have 3 rca outputs it because some crt video monitors take 3 of them,i have a video montor at home ,that doesnt have a VGA 15 pin cable it a macintosh monitor
email the person you bought it from and ask witch is video output ,most likely its yellow like on all video equipment and also ask what is the red and white for too
Ok I figured out the problem. These cables only work if your board already.has a Tv out composite converter. So no matter which cable I try it will not work. I need a converter box and so does Sam http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=sr_1_1?ie=UTF8&qid=1346898254&sr=8-1&keywords=vga+to+s+video+converter
I bet eBay may have something cheaper but I prefer not to buy from.China.
wow thats the same one i bought awhile back for a tv that didnt have vga input,my new 50 INCH LCD tv has one on it besides dvi and 3 d format,it was a old sony flat monitor before lcd came out i have it sitting in a box,its the very same one
but the cable i bought from amazon does need that adapter
here is info on it This cable has a VGA connector on one end and both RCA Jack Video (TV) Out and S-Video Out connectors on the other end like i said true tv output more data on it Connect to TV's one you got and SFOY is not the same as the one on amazon vga to true tv output
more info on this adapter,you video card need to switch between tv and vga ,some do and some dont my laptop has it Cables Unlimited AUD-2350 VGA to S-Video or RCA Adapter Use this adapter to connect your Computers and Laptops to TVs and Projectors. This adapter works with graphics cards that have TV-Out function capability through the VGA connector. Check your Video Card manual or manufacturer to make sure that your VGA card has TV-Out function capability
Ok so I started building the first shoulder servo, it looks cool. I only need to wire it for the new larger pot. I will go ahead and assemble the other one too.
sweet
I will upgrade to metal gears later but these nylons are fine for now. The servo I am using is 1501mg power HD 240 oz in of torque at 6 volts. The gear ratio I picked was 5 to 1. That's 1200 oz in stall torque and 800 to 900 oz in working torque.
That looks like it's going to be strong!
Both are assembled now I just need to do the pot mod and remove the stopper pin.on the.main.shaft.