cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Ezang's Mr. Metal Again 2021 - Made From Servo City Parts -...
Greeting from Mr. Metal wishing everyone well and announcing a body move soon - signed EzAng
69Developer's Anyone Interested In Seeing Some Pictures And...
XLR-1 v2 Robot photos and review: parts impressions, assembly delayed by health issues, plus easy tips to rotate posted...
Robotz012248's My Desktop Trio Of Robots
Interactive desktop robots built from a Harbor Freight parts box using EZ-B, micro servos, pan/tilt and LEDs, programmed...
it runs faster because of the upgrade to 64 bits ,using about double the processor power on house computers its great, on computers it just doubles the power supply power on my computers i have mine fixed so when i get a virus ,i swap out a bad drive with a virus with a good drive,then formated it and do a copy drive to drive,no viruses,second i use whats called a MAC address,so no hackers get it,i almost never get a VIRUS
JOSH i see at the bottom of your computer screen that windows not activated yet
i ordered a nice MIG welder,cant wait to get it,to weld aluminium and more thats going to help my robot building alot
JOSH getting ready to paint soon
Josh, you are making great progress.
he getting there,little by little
Id say he is going the extra mile and doing a lot!
Ok so since I'm already working on the base I needed to install the speakers.
I used tape to suspend the speaker bezel then a bit.of superglue to keep it from moving around. I will seal it up on the backside with globs of hotglue and I will fill it from the front with epoxy or filler.He looks kind of crazy...
Jarvis is too much to be a vacuum.