My new update Arm robot 11/14/2019

EzAng

USA
Skip to comments   Jump to end

My new update to the Robot arm, added a 5th servo to the gripper - using auto-position - Ez builder software and Ezb4 this time,  5 servos total  MG996R SERVOS - also used a shorter brace to hold the gripper

By — Last update
Jump to end

Other robots from Synthiam community

Cem's Ziggy The Hexapod

Cem's Ziggy The Hexapod

Ive eventually got around in completely rebuilding my Hexapod ( Ziggy ) using the HDD Servos, after I completely...
Rich's The Testbot

Rich's The Testbot

So my second EZ-Kit turns up and rather than start a strip down of Wall-E or Omnibot like I had planned I decided to...
Hazbot's Bob Built On Bits

Hazbot's Bob Built On Bits

This is Bob, our 3 ft tall house robot using the Ez-Robot kit and leftovers from plastering angle beads (lengths of...

ARC Pro

Upgrade to ARC Pro

Harnessing the power of ARC Pro, your robot can be more than just a simple automated machine.

PRO
USA
#1   — Edited

Thank Nomad 6r  -  I received your email

Should I do a different video?

Login to post a comment