I am working on an old Omnibot 2000. It was in bad shape to begin with, so it didn't seem such a crime to give him a new coat of paint and an extra 8 inches of height. He is sporting an Asus t91mt multitouch convertible netbook. He was designed with a different robot controller in mind- but since discovering the EZ-B, I have changed plans and have one on order. He is pretty much a blank canvas at this point- if anyone is interested, I will post updates and take suggestions on the build as he becomes a member of the EZ-B family.
By ConfoundedHound
— Last update
Other robots from Synthiam community
Mickey666maus's BLDC Control Odrive-For-ARC
This is the setup for my Tarot 6S 4108 KV:380 BLDC motor to be used like any other servo in ARC... It is just MY...
Justinratliff's Ez-Robot Bb-8 Hexapod Body
I made a BB-8 hexapod body to go with the head. You can use the mountable head with the EZ-Bit I made: Or you could...
Pirumpi's Ez-B, I Would Like You To Meet Nodejs
I really love connecting electronics to the web and my EZ-B was not an exception. Last night I spent a couple hours...
Now that's awesome...
I think their is no crime in changing color and adding height. Cutting into them and reworking everything is what its all about.
Love the color too. I would like to see you update us on your progress. My bot is buried in the forum down a ways. link to my bot
check it out if you have time.... its your bot's short, fat, stupid and slow older brother
Ron
Thanks! Your bot is looking great!
How did you change the height? That is real neat! I have one of those 2000's. I have NO idea what to do with it. Looks like you beat me to it
The height was increased by bolting a small wooden frame to the Omnibot 2000 base. The robot comes apart in two halves here- so it was a natural place to add to the structure. I am no carpenter- so don't poke too much fun at the Homer Simpson-like quality of construction.
I cant see anything to poke fun at. Its a great build! I myself am truly inpressed at the total project! I can't wait to see what's next.
Wow! Omnibot 2k looks great! I love that you made it taller. I think I'd like to do that with my Robie Sr.
Question: Does the wooden frame increase the weight significantly at all? Yours looks sturdy. I'd like to try and use the existing motors from my bot (if they work!). Or are you using different drive motors other than the stock Omnibot 2k motors?
Again, great looking bot!
The frame does not add too much weight. Plus, there is a steel weight in the base you can remove to offset some of that. (Tomy put the weight in to lower the center of gravity, so things Omnibot picks up won't tip him over) Most of the extra weight is from the 9.5 amp/hour Power Wheels battery you see back there. I cut some of the old base away so that the battery sits in the accessory drawer, as low to the ground as possible.
I am using the original drive system. It still works well enough to drive him around. It is kinda noisy though...
I really like that pic of inside the bot with the EZ-B. Looks at home
You did a nice job at keeping it clean. Real clean!
What are the red wires for? It looks like they may be ADC or on the power header, i can't tell