This is sort of a survailence tank i've been building the past couple of days. At its heart is of cours the EZ-B connected wirelessly via an xbee xsc 900 which gives awsome range even through several walls. The Android phone is for video which is running a IP Camera app to stream High Quality video back to my computer over wifi.
Other parts include:
Vex tank treads (modified)
Servo city servo Block's
Robo Claw regenerative 2X5a dual motor controller
cheap brushed esc to act as a dimmer for the headlights
two turnigy 5000mah packs in series to power everythinrg
By imrisaac
— Last update
Discover more robots
Dunning-Kruger's My Inmoov Bartender
Autonomous inMoov bartender using Luis Vazquez TTS jaw movement, inspired by Bob Houston; showcases full autonomy and...
Teslatool's My Robot : Boybot
Boy Marx' erster Roboter: Freude, ihn zum Leben zu erwecken und Grüße aus Deutschland
Ezang's For Some Fun, Arduino LCD Monitor And ARC Serial...
Test Arduino LCD and Synthiam ARC serial monitor 2021 EzAng
yes im using the 393 motor, and i did not buy the tank track upgrade kit because it didn't look like it was going to do what i wanted so i used strips of rubber and glued them to the standard tracks.
mine before i change to use it on my omnibot,i made a vex robotic tank and had it climb rocks,over logs and on flat surface so very good,those track upgrade made a very big improvement
Do you need to use a special software or change something in the ez-software to use the xbee?
Imrsaac , where you been man. Worked the motors I sent you into the project yet?
jstarne1, sorry man been very busy lately. I moved and have a heavier load of classes so i might no be able to work on anything for a while. I started it a while back, made a mount for the motor to mount to the compressor but thats it. ill try to post some pics later.
Kurt, there is software it called X-CTU you can download it here https://www.digi.com/support/productdetail?pid=3352 under Diagnostics, utilities XCTU 5.4.7.5 installer
sorry it took so long to reply