Robot Building Questions
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
Gaming Mouse Pad
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Control LewanSoul LX-16A servos via ARC (EZ-B v4/IoTiny): assign virtual ports, read positions, set speeds, and enable continuous rotation.
Featured
Mr. Roman with scarf and hat and a little blue Arduino-based friend
question
Analog Motor Speed With Joystick ?
Hello, I do not know if the subject has already been treated. I buy a 2X5 sabertooth I configure like this: https://synthiam.com/Tutorials/Help.aspx?id=173 I control my motors with a joystick gamepad with the joystick panel, it works. The problem is that it is all or nothing: the motors run in full speed or not run. I will wish that I push the...
5
3 k
Kalinox |
question
Ez-B Failure Solution Found
It appears that mischarged batteries were playing with the ez-b. 4 batteries were almost fully discharged while 2 others were 3 quarters full. this caused some sort of ez-b burn out that make servos go berserk. So anyone who suffers from this sort of problem, its your batteries. double check when using the battery pack that comes with the ez-b.
1
2 k
jstarne1 |
question
Receive Audio From Robot
Hello, I was using the robot the other day to interact with my friend on the first floor of my house while I was on the second floor. He could hear the robot through the...
16
4 k
Rich |
question
Multichannel For Voice Commands With ARC
I am looking to use ARC voice commands within the house . However, I an not sure how to make ARC monitor multiple microphones/channels or what audio system needed to facilitate my request from any room . Any ideas ?
12
4 k
hhammoud |
question
Sabertooth To Ez-B
i made a diagram. is this the way to connect the ez-b to the sabertooth? Feel free to edit the pic and repost it.
8
4 k
Sleenard |
question
Importing Scripts And Controls In ARC
It was mentioned earlier so here it is, the tutorial for importing scripts and controls in to ARC project. It is assumed you have already...
4
4 k
Tymtravler |
question
Cost Of 3D Printing ?
Just wondering about what the cost will be to have parts printed I found a motor i wish to mess around with dont have the link to the 3D plans for the motor yet but i do have a...
4
3 k
Wolfie |
question
Relay Module
Hello is an easy way to Kinect Relay Module to EZ-B
2
976
hhammoud |
question
Some More Exciting Stuff Happening At Ez-Robot
Watch for some more exciting news next week ... [hint: you might be seeing some new faces on the office webcam]. Shhhhhh ......
6
2 k
Wolfie |
question
Tutorials Kinda Vague?
The ez boxbot instructions seem to end at step 11 with the servo panel. Where are the rest of the tutorials?
9
3 k
Rich |
question
The Revolution Has Begun!
Hey All, I scooted (1 1/2hour drive) to the EZ-Robot open house tonight. The new digs look awesome! DJ has done well! So the Revolution has begun! As DJ stated in the...
43
6 k
irobot58 |
question
Robot Leonardo
Robot Leonardo under construction A motorised wheelchair base it incorporates the original motors and the joystick controller. Its design allows components to be removed so that modifications...
17
4 k
Lori |