Robot Building Questions
Your robot can be more than a simple automated machine with the power of ARC Pro!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Control Roomba/Create via ARC: drive, stream sensors, read encoders, configure COM/HW UART, and send pose to NMS for mapping/navigation.
Featured
EZ-B powered 20-DOF PHILO humanoid: AutoPosition setup in hours, servo power tips, regulator heat and brownout notes.
question
Ninebot Open Source Segway Robot At Ces2016
For those who are interested... seems pretty cool, especially the modular attachment ability. It incorporates Intel's Real Sense...
5
4 k
Kleinman98 |
question
Theremin Vision
Robot Sensor: I thought some would be interested in this unique sensor application using a device known as a Theremin. Mainly used as a musical device, it has applications in other areas as...
1
3 k
rgordon |
question
Continuous Servo Ramping
I don't want to spoil the project yet, but I have 2 continuous servos in tank drive. The continuous servo movement panel works but for balance purposes I need to ramp it up to full power. The problem is if I issue a PWM command, the servos will only go forward which causes the robot to spin(one servo mounted backwards). How can I ramp one servo...
2
3 k
CardboardHacke… |
question
Delay From Pandorabot To Talk Servo Plugin
I am using the talk servo plugin with the pandorabot. But there is a 2 second delay between the two. It seems like that the pandorabot plugin gets processed first and when its over the talk servo starts and then the servo moves. Any idea? Paulo
4
3 k
Proteus |
question
9 Volt Power For Ez-B V4
I am new to EZ-B v4. The on-line guide calls for hooking up the EZ-B v4 base to 6 1.5 volt batteries. Can't I just attach it to a 9 volt AC-DC power supply? Thanks, Bob
4
2 k
Science Bob |
question
Motor Controller Ramping Script Help
E4-B4 has been a little neglected lately, so or been playing trying to give him more graceful drive movements, so I'm looking for a little help with...
22
6 k
Steve G |
question
Adapters
Hi Why were there no adapters in my box EZRobotJD? Karin
5
2 k
thetechguru |
question
Can Anyone Recommend Pla And Abs
I had a failure again last night because of a nozzle clog after 17 hours of printing. This was my second try at the same part. I have made three of these...
12
4 k
Andy Roid |
question
Set Port On Or Off
am trying to set a digital port d23 on or off set(D23,on) seems something missing here. i check cheet but it confuse me.
16
4 k
Nomad 6R |
question
Question Using Tablet Camera Using ARC
I having a problem using the camera on my Windows 8.1 tablet. I get this error: Object recognition initialized Error initializing Camera: System.Runtime.InteropServices.ComException (0x80004004):Error HRESULT E_FAIL has been returned from call to a COM component. I get the same error using either the front or rear facing camera...I have the latest...
33
7 k
thetechguru |
question
Omnibot 2000 Rubber Treads
I know this has been asked, but does anyone still make homemade treads for the Omnibot 2000? Mine needs it bad! I love everybody's work on the Omnibot 2000 and 5402!
1
3 k
MikeDC |
question
Having Questions Connecting ARC To Wifi
I can get the controller to connect to the wireless router but I can't seem to get ARC to connect to the controller. I get the following error report. Attempting connection on 192.168.1.1:23 Connection Failed: System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.1.1:23...
2
2 k
thetechguru |