Robot Building Questions

Myo Ware Muscle Sensor

could anyone explain to me how i would go about hooking up this sensor in attached link to the ezb and control the movement of servos with it. Thanks in advance myo sensor

Just Published My First Wheel Tutorial

Hey guys, first one is up! Next, I'm doing one using more advanced tools, mainly a router. This one will probably take me a few days too. Let me know if you think this is useful, or I need to clarify anything. I didn't get to do any action shots because I work by myself while the wife is at school.

Roboclaw, Packet Serial Mode With Crc/ How To Execute Cyclic Script In Moble App

Hi, 1. did anybody already implement the Packet Serial Mode with CRC into EZB script? before I start to translate...........maybe someone did already the work ;-) roboclaw manual: CRC16 Checksum Calculation Roboclaw uses a CRC(Cyclic Redundancy Check) to validate each packet it receives. This is more complex than a simple checksum but prevents...

New Member With Wheel Building Question

Hey folks! Used to try to build bots when I was a kid. I had a few successes, but mostly kludged up messes. Anyway, my wife bought me a few books because I am now disabled and can't work anymore. Hips and back are degenerating. I am building a mix of a bot from a few different books, and some of the parts I want to make myself. I want to build the...

Controlling I-Robot Create 2 With ARC Roomba Movement Panel?

I disconnected the servo from D0 on my Adventure Bot and connected GND on D0 (Black Pins) to Pin 6 on Create 2 connector (GND)-(Pin 7 also a GND pin on Roomba). I connected D0 Output (White Pins) to pin 3 on Roomba (Receive Pin). The Create 2 communicates at 115K Baud as does the newer Roombas. I tried checking the "use old protocol" and...

ARC Client Connection Question

Hi, I'm having trouble talking to my JD in client mode. When I power him up he says "connected to network" When I connect through my browser I can connect and the buttons work When I connect in ARC I get "Attempting connection on 192.168.0.10:23 Connected to 192.168.0.10:23 Reports EZB v4 OS With Comm 1 EZ-B v4 ID:...

Omnibot 2000 Tires

My Omnibot 2000's tires are completely gone, I don't even have any to make a mold of, does any one here have any I could purchase? Or know of where I can replace or buy them? They don't have to be the stock tires, just something that will work and hold on to the wheel. Thanks.

Omnibot 2000 Wheel Tread.

I was wondering who can make me some tread for my omnibot 2000 drive train, I need tread for a 4 wheels. Another question is, what other wheels would fit, if I wanted to swap the wheels out?

How To Stop A Moving Servo

I'm learning how to use EZB scripts. I'm doing a very simple exercise. I make a servo move , and want it to stop it as soon as a sensor makes a digital input high. I'd want to see how long it takes to actually stop. I use "release" to stop it (it's a digital servo, it will keep its position even with no signal). I see no other script...